Abstract:Reverse thermally induced separation (RTIPS) was used to obtain a separation membrane with a better internal structure for a higher water flux and a surface that could easily form a hydration layer. In comparison to the traditional modification method, this work focused on the aspect that the internal structure obtained by changing the membrane-making method provided easier adhesion conditions for the dopamine/TiO<sub>2</sub> hybrid nanoparticles (DA/TiO<sub>2</sub> HNPs) obtained by biomimetic mineralization. It provided a basis for exploring the variation in adhesion with the water bath temperature and the amount of titanium added through the study of turbidity point, SEM images, water contact angle, thermogravimetric test, EDX, AFM, XPS, FTIR and other test results. The SEM images proved that the membrane obtained through the RTIPS method had a porous surface and spongy internal structure, furthermore, additional polymers were adsorbed. Use of EDX demonstrated that biomimetic mineralization prevented the production of agglomerated titanium dioxide. XPS and FTIR spectra confirmed the introduction and immobilization of HNP aggregation. Moreover, a decrease in the surface roughness and water contact angle further suggested an improvement in the hydrophilicity of the modified membrane. The introduction of HNP at a higher water bath temperature helped increase the water flux up to ten times, moreover, the oil-water separation efficiency could still reach over 99.50%. Lastly, a cycle test of the modified membrane under the optimal conditions helped confirm that the membrane forming conditions at this time could provide a better environment for the formation of the hydrophilic layer, which was conducive to the recycling of the separation membrane. In summary, more fixed more hydrophilic particles could be obtained through the RTIPS method based on biomimetic mineralization to prevent the accumulation of titanium dioxide, thus helping improve permeability and anti-fouling of the membrane.

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Preparation and characterization of poly (vinylidene fluoride)/TiO 2 hybrid membranes

Polysulfone/TiO2 hybrid ultrafiltration membrane prepared by the sol-gel process

Hydrophilic Modification of Poly(ether Sulfone) Ultrafiltration Membrane Surface by Self-Assembly of TiO2 Nanoparticles

Novel Polyethersulfone Hybrid Ultrafiltration Membrane Prepared with SiO2-g-(PDMAEMA-co-PDMAPS) and Its Antifouling Performances in Oil-in-water Emulsion Application

Development Of A High-Performance Polysulfone Hybrid Ultrafiltration Membrane Using Hydrophilic Polymer-Functionalized Mesoporous Sba-15 As Filler

A Novel PES-TiO2 Hollow Fiber Hybrid Membrane Prepared Via Sol-Gel Process Assisted Reverse Thermally Induced Phase Separation (RTIPS) Method

Cu-TCPP Nanosheets Blended Polysulfone Ultrafiltration Membranes with Enhanced Antifouling and Photo-Tunable Porosity

Zwitterionic Polysulfone Copolymer/Polysulfone Blended Ultrafiltration Membranes with Excellent Thermostability and Antifouling Properties

Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

Sol–gel Preparation of PAA-g-PVDF/TiO2 Nanocomposite Hollow Fiber Membranes with Extremely High Water Flux and Improved Antifouling Property

A Novel Antifouling and Thermally Stable Polysulfone Ultrafiltration Membranes with Sulfobetaine Polyimide As Porogen

Development of Hybrid Ultrafiltration Membranes with Improved Water Separation Properties Using Modified Superhydrophilic Metal-Organic Framework Nanoparticles.

Development of Highly Permeable and Antifouling Ultrafiltration Membranes Based on the Synergistic Effect of Carboxylated Polysulfone and Bio-Inspired Co-Deposition Modified Hydroxyapatite Nanotubes.

Self-Assembly of Tio2 Nanoparticles Around the Pores of Pes Ultrafiltration Membrane for Mitigating Organic Fouling

Preparation of Antifouling Ultrafiltration Membranes from Copolymers of Polysulfone and Zwitterionic Poly(arylene Ether Sulfone)s

Preparation and Characterization of PSF/TiO_2 Organo-Mineral Composite Ultrafiltration Membrane

Alleviating Membrane Fouling of Modified Polysulfone Membrane Via Coagulation Pretreatment/ultrafiltration Hybrid Process

Preparation And Characterization Of Antifouling And Antibacterial Polysulfone Ultrafiltration Membranes Incorporated With A Silver-Polydopamine Nanohybrid

Preparation and Properties of Polysulfone/tio2 Composite Ultrafiltration Membranes

Superhydrophilic polyethersulfone (PES) membranes with high scale inhibition properties obtained through bionic mineralization and RTIPS