Abstract:A hydrophilic membrane commonly performs better in resisting fouling. But most prevailing polymeric membrane materials are hydrophobic thus prone to be fouled in practical operations. The current study presents a facile strategy for the fabrication of superhydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes on the basis of a blending method and a dip-coating technique. A carboxyl-rich substance was firstly blended as an additive in the PVDF membrane matrix during fabrication. The incorporated carboxyl groups acted as anchor sites for the subsequent binding of amine-grafted silica nanoparticles (NPs). After a simple dip-coating operation, the PVDF membrane would be covalently functionalized to be superhydrophilic. Three types of carboxyl-rich additives including poly(methacrylic acid sodium salt), sodium alginate, and ethylenediaminetetraacetic acid (EDTA) were separately used to prepare different primary membranes for respective functionalization operations. The resultant membranes were systematically characterized in terms of hydrophilicity, morphology, permeability, and antifouling performance. Consequently, the simple dip-coating functionalization dramatically enhanced the surface hydrophilicity of all the additive-blended PVDF membranes. All the functionalized membranes obtained a significantly lower initial contact angle, which instantly reduced to < 5 degrees within several seconds. This could be attributed to the hydrophilic chains grafted on the NPs and the proper micro-/nano topography offered by the stack of NPs. Particularly, the EDTA-blended membranes achieved a higher and more stable hydrophilicity. Also, all the functionalized membranes obtained higher water permeabilities as compared with the pristine membrane. Moreover, all the superhydrophilic membranes restored over 80% flux (much higher than the similar to 53% for the pristine membrane) after cleaning in the fouling tests, demonstrating dramatically enhanced antifouling capacity.

Super-hydrophilic TiO2-based coating of anion exchange membranes with improved antifouling performance

Does Hydrophilic Polydopamine Coating Enhance Membrane Rejection of Hydrophobic Endocrine-Disrupting Compounds?

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Imparting Antimicrobial and Antifouling Properties to Anion Exchange Membrane through the Modification with Gentamicin‐Based Polymer

Antifouling modification of PVDF membranes via in situ mixed-charge copolymerization and TiO2 mineralization

Poly(Vinyl Alcohol)-Based Anion Exchange Membranes with Improved Antifouling Potentials and Reduced Swelling Ratios for Electrodialysis Application

Tannic Acid-Mediated Layered Double Hydroxide Hybridizing PVDF Superwetting Catalytic Membranes Constructed Via Ion Diffusion-Induced Interfacial Self-Assembly for Boosting Water Purification

Superhydrophilic and Oleophobic Membrane Functionalized with Heterogeneously Tailored Two-Dimensional Layered Double Hydroxide Nanosheets for Antifouling

Improvement of the antifouling performance and stability of an anion exchange membrane by surface modification with graphene oxide (GO) and polydopamine (PDA)

Constructing Blocked-Nanolayer by Surface Charge Inversion over Anion Exchange Membrane for Improved Antifouling Performance

Imparting antibacterial adhesion property to anion exchange membrane by constructing negatively charged functional layer

Remarkable Anti-Fouling Performance of TiO2-Modified TFC Membranes with Mussel-Inspired Polydopamine Binding

Polypropylene Microfiltration Membranes Modified with TiO2 Nanoparticles for Surface Wettability and Antifouling Property

Tannic Acid Coating and in Situ Deposition of Silver Nanoparticles to Improve the Antifouling Properties of an Ultrafiltration Membrane

A chitosan/dopamine-TiO2 composite nanofiltration membrane for antifouling in water purification

Improving antifouling performance of FO membrane by surface immobilization of silver nanoparticles based on a tannic acid: diethylenetriamine precursor layer for municipal wastewater treatment

Rapid Co-Deposition of Dopamine and Polyethyleneimine Triggered by CuSO4/H2O2 Oxidation to Fabricate Nanofiltration Membranes with High Selectivity and Antifouling Ability

Surface Modification of Anion Exchange Membrane by Covalent Grafting for Imparting Permselectivity Between Specific Anions

Surface functionalization via synergistic grafting of surface-modified silica nanoparticles and layered double hydroxide nanosheets for fabrication of superhydrophilic but relatively oleophobic antifouling membranes

Enhancing the antifouling property of polymeric membrane via surface charge regulation

A Facile Approach to Fabrication of Superhydrophilic Ultrafiltration Membranes with Surface-Tailored Nanoparticles