Poly(Vinyl Alcohol)-Based Anion Exchange Membranes with Improved Antifouling Potentials and Reduced Swelling Ratios for Electrodialysis Application

Huimin Ruan,Lu Yu,Yuyang Yao,Junhua Li,Jianlang Yan,Junbin Liao,Jiangnan Shen
DOI: https://doi.org/10.1021/acs.iecr.2c01110
2022-07-27
Industrial & Engineering Chemistry Research
Abstract:The development of antifouling ion exchange membranes (IEMs) is of great significance to the application of electrodialysis (ED). Membrane fouling is a ticklish question affecting the membrane performance, which results in an increase in energy consumption in ED and unnecessary economic loss. In this work, we report poly­(vinyl alcohol) (PVA) as an IEM substrate; a large number of hydroxyl groups on the aliphatic chain react with a small rigid molecule of 4-(bromomethyl)­benzaldehyde (QBMB) prepared by us and then adjust the time of quaternization by trimethylamine to design a series of antifouling anion exchange membranes (AEMs) named PVA-QBMB-X (X = 2, 4, 6, and 12). The as-prepared AEMs with a cross-linking structure within the matrix exhibit low surface area resistance and reduced swelling ratios of <16.2%. The optimized PVA-QBMB-12 AEM shows better antifouling performance in terms of a much longer transition time (1150 min) than commercial membrane AEM-Type-II (620 min) by possessing excellent hydrophilicity and superior ED performance compared with the commercial membrane. The optimized AEM shows a superior NaCl removal rate of 99.80 ± 1.5%, a current efficiency of 82.64 ± 0.8%, and an energy consumption of 2.98 ± 0.3 kWh kg–1 NaCl, which are better than those of AEM-Type-II (97.51 ± 1.5, 76.26 ± 0.7%, and 4.54 ± 0.6 kWh kg–1 NaCl, respectively). Thus, the investigation demonstrates the potential application of the as-prepared AEMs for ED in organic pollutant systems.
engineering, chemical
What problem does this paper attempt to address?