Abstract:Hydrophilic silica (SiO2) nanoparticles (average size=7nm), which act as inorganic acids at low pH (<2), were added together with a PEO–PPO–PEO triblock copolymer dispersant to a random disulfonated poly(arylene ether sulfone) copolymer in the potassium salt (SO3−K+) form in order to control permeation and rejection characteristics of the homopolymer. The dispersants (shell) absorbed on the surface of SiO2 nanoparticles (core) formed a distinctive core–shell structure. The PEO units located at the outside of the dispersant formed complexes with SO3−K+ groups of BPS-20 via ion–dipole interactions. These interactions induced a compatible binary system following the Flory–Fox equation associated with glass transition temperature (Tg) depression and prevented extraction of the water-soluble dispersant even under aqueous conditions. The ion–dipole interaction, combined with hydrogen bonding between SiO2 and the dispersant, caused SiO2 nanoparticles to be well distributed within the BPS-20 matrix up to a limit of 1wt.% of SiO2 and minimized the formation of non-selective cavities within the matrix's hydrophilic water channels. The resulting BPS-20_SiO2 nanocomposites showed improved salt rejection and reduced ionic conductivity. These trends are analogous to those of disulfonated copolymer systems, with polar groups creating hydrogen bonding or acid–base complexation with SO3−K+ groups in BPS copolymers. Well dispersed SiO2 nanoparticles in highly water-permeable desalination membranes are expected to result in an increase in salt rejection but very little change in water permeability. The addition of nanoparticles to desalination membranes may offset the permeability-selectivity tradeoff observed in polymer membranes. Above 1wt.%, SiO2 nanoparticles increased both the interchain distance between polymer chains and the water uptake. However, the increased hydrophilicity due to high SiO2 content did not yield improved water permeation of the nanocomposite membranes. The SiO2 nanoparticles acted as barriers, hindering water passage (restrictive diffusion) and lowering water permeability. Meanwhile, acidic hydroxyl groups (OH2+) on the SiO2 surface in the sulfonate matrix led to improved ionic conductivity, but NaCl rejection capability decreased because the concentration of SO3−K+ was diluted by highly absorbed water molecules, resulting in weakened Donnan exclusion. The mechanical properties and chlorine resistance of all BPS-20_SiO2 nanocomposites were comparable to those of BPS-20.

Nano-enhanced sulfonated poly(arylene ether sulfone) composite membranes and their characterization

In-situ Complexation of Silver Nanoparticle on Thin Film Composite Reverse Osmosis Membrane for Improving Desalination and Anti-Biofouling Performance

A Novel Thin-Film Nano-Templated Composite Membrane with in Situ Silver Nanoparticles Loading: Separation Performance Enhancement and Implications

Clay Nanosheets As Charged Filler Materials for High-Performance and Fouling-Resistant Thin Film Nanocomposite Membranes

Creating Smart Chlorine-Resistant Polyamide Reverse Osmosis Membranes Via Self-Healing Temperature-Responsive Nanocontainer Functionalization

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Acid and Multivalent Ion Resistance of Thin Film Nanocomposite RO Membranes Loaded with Silicalite-1 Nanozeolites

Preparation and characterization of surface-modified zeolite-polyamide thin film nanocomposite membranes for desalination

Hydrophilic Silica Additives for Disulfonated Poly(arylene Ether Sulfone) Random Copolymer Membranes

Advanced Sulfonated Polyester Nanofiltration Membranes for Superior Dye Separation, Desalination, and Chlorine Resistance

Positively Charged Polysulfonamide Nanocomposite Membranes Incorporating Hydrophilic Triazine-Structured COFs for Highly Efficient Nanofiltration

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

A novel chlorine-resistant polyacrylate nanofiltration membrane constructed from oligomeric phenolic resin

Enhancing Water Purification by Integrating Titanium Dioxide Nanotubes into Polyethersulfone Membranes for Improved Hydrophilicity and Anti-Fouling Performance

Anti-Foulant Ultrafiltration Polymer Composite Membranes Incorporated with Composite Activated Carbon/Chitosan and Activated Carbon/Thiolated Chitosan with Enhanced Hydrophilicity

Cu-TCPP Nanosheets Blended Polysulfone Ultrafiltration Membranes with Enhanced Antifouling and Photo-Tunable Porosity

Modification of polyethersulfone membranes by Polyethyleneimine (PEI) grafted Silica nanoparticles and their application for textile wastewater treatment

In-situ Interfacial Polymerization of Polyamide TFN Membranes by Adding a Diamino-Silane Coupling Agent: Toward Enhanced Desalination Performance

Surface engineering for anti-wetting and antibacterial membrane for enhanced and fouling resistant membrane distillation performance

Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

High-performance Nanofiltration Membranes with a Polyamide-Polyester Composite Layer and a Polydopamine Surface Layer for Desalination and Dye Pollutant Removal