Catalytic Performance of Fe–ZSM-5 Catalysts for Selective Catalytic Reduction of Nitric Oxide by Ammonia

R. Q. Long,Ralph T. Yang

DOI: https://doi.org/10.1006/JCAT.1999.2674

1999-12-10

Abstract:A series of Fe-exchanged molecular sieves were studied as catalysts for the selective catalytic reduction (SCR) of NO with ammonia. It was found that Fe–ZSM-5 and Fe–mordenite catalysts were highly active for the SCR reaction. Nearly 100% NO conversions were obtained at 400–500°C under conditions with a high space velocity (GHSV=4.6×105 l/h). However, Fe–Y and Fe–MCM-41 with larger pore sizes showed lower activities for this reaction. For Fe–ZSM-5 catalysts, the SCR activity decreased with increasing Si/Al ratio in the zeolites. As the Fe-exchange level in the Fe–ZSM-5 catalysts was increased from 58 to 252%, NO conversion increased at lower temperatures (e.g., 300°C), but decreased at high temperatures (e.g., 600°C). Compared with the commercial vanadia catalyst, based on the first-order rate constants, the Fe–ZSM-5 catalyst was five times more active at 400°C and seven times more active at 450°C. It also functioned in a broader temperature window, produced only N2 (rather than N2O) and H2O, and showed a substantially lower activity for oxidation of SO2 to SO3.

Chemistry