Abstract:The CoCrFeMnNi high entropy alloy thin films with crystalline (solid solution) structure or amorphous state were fabricated by magnetron sputtering process at different target powers and different substrate bias. Effects of the target power and substrate bias on the characteristics of the CoCrFeMnNi thin films such as microstructures, morphology and surface topography, as well as mechanical properties and corrosion behavior were studied. Phase prediction was calculated by using thermodynamic and kinetic criteria under various deposition conditions. The enthalpy, entropy, δ and Ω parameters, and electronegativity differences influenced the solid solution stability of thin films. These parameters led to the formation of solid solutions with crystalline or amorphous structures under specific limits, which corresponded to the practical XRD and TEM analysis results. Using a substrate bias in the deposition of CoCrFeMnNi thin film changed the amorphous structure to a crystalline (solid solution (BCC + FCC)) at higher target powers (200 and 300 W). On the other hand, the film structure was entirely amorphous at all sputtering target powers without the substrate bias. The mechanical properties, such as hardness, Young's modulus, film strength, and fracture toughness of CoCrFeMnNi thin film, can be enhanced by using the substrate bias and increasing the sputtering power. The potentiodynamic polarization test in 3.5 wt% NaCl aqueous solution indicated that the deposition of CoCrFeMnNi thin films at different sputtering powers and without substrate bias could increase the corrosion resistance of 304 stainless steel substrate. Using the substrate bias of −100 V in the fabrication of CoCrFeMnNi thin film decreased the corrosion current density and increased its polarization resistance.

Influence of the Gas Flow Rate on the Crack Formation of AlCoCrNi High-Entropy Metallic Film Fabricated Using Magnetron Sputtering

Study of Nanocrystalline Fe-Al-N Soft Magnetic Thin Films

Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering

Studies on the Morphological and Mechanical Properties of TiZrHfNiCuCo Metallic Coatings Deposited by DC Magnetron Sputtering

Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films

Comparative Study of the Tribology of Amorphous Carbon Films Via Magnetron Sputtering Depending on the Different Magnetic Field

Effect of Al Addition on the Microstructure and Mechanical Properties of Al x CrCoNi Medium Entropy Alloys Prepared via the Magnetron Co‐Sputtering

Investigation of deposition parameters on the structural properties and hardness of TiAlN films deposited via reactive pulsed DC magnetron sputteringInvestigation of deposition parameters on structural properties and hardness of TiAlN films deposited by reactive pulsed DC magnetron sputtering

Structural and Mechanical Properties of Multi-Element (alcrmotatizr)nx Coatings by Reactive Magnetron Sputtering

Effects of Carbon Doping and DC Bias Voltage on Microstructure and Mechanical Properties of AlCrCN Films Synthesized via HiPIMS

Effects of Nitrogen Flow Ratio on the Structure and Properties of Reactively Sputtered (almonbsitativzr)n(x) Coatings

Structure, Composition and Mechanical Properties of Reactively Sputtered (tivcrtaw)nx High-Entropy Films

Influence of Nitrogen Content and Bias Voltage on Residual Stress and the Tribological and Mechanical Properties of CrAlN Films

Effect of sputtering power and substrate bias on microstructure, mechanical properties and corrosion behavior of CoCrFeMnNi high entropy alloy thin films deposited by magnetron sputtering method

Nitride Films Deposited from an Equimolar Al–Cr–Mo–Si–Ti Alloy Target by Reactive Direct Current Magnetron Sputtering

Effects of nitrogen content on structure and mechanical properties of multi-element (AlCrNbSiTiV)N coating

Effect of nitrogen flow rate on the microstructure, mechanical and tribological properties of CrAlTiN coatings prepared by arc ion plating

Structure and mechanical properties of CrN thick films deposited by high-rate medium-frequency magnetron sputtering

Evolutions of the Microstructure and Properties of the (CrMoNbTaZr)NX Films Prepared by Reactive Magnetron Sputtering: Effects of Stoichiometry and Crystallinity

Microstructure Characterization of AlxCo1Cr1Cu1Fe1Ni1 (x=0 and 2.5) High-Entropy Alloy Films

Effect of Co Contents on Microstructure and Cavitation Erosion Resistance of NiTiAlCrCoxN Films