Abstract:A simultaneous achievement of high strength and toughness, as well as high conductivity in traditional Al-1.9Mn cast aluminum alloy used in the manufacture of water-cooled radiator shells has proven to be challenging. The addition of Mg and Si elements was implemented in the cast aluminum alloy for a modified treatment to solve the problem. The results showed that the inclusion of Si facilitated the transformation of the plate-like Mn-rich phase (Al6Mn) in the initial Al-1.9Mn alloy into a Chinese-script phase (Al15Mn3Si2) in the new Al-1.9Mn alloy. A higher Si content resulted in an increased volume fraction of Al15Mn3Si2 and a decreased solid solution of Mn in the matrix. Furthermore, a high content of Mg (0.9 wt%) in the Si modified Al-1.9Mn alloy resulted in a notable property reduction, not only in its elongation, but also in its electrical conductivity. It can be attributed to the formation of Mg2Si and the increased solid solution of Mg in the matrix. Through the optimization of the Mg and Si contents, new Al-1.9Mn alloys with superior mechanical properties and excellent electrical conductivity were successfully developed. With the addition of 0.45 wt% magnesium and 0.75 wt% silicon, the new Al-1.9Mn alloy increased its tensile strength to 170 MPa and yield strength to 88 MPa while maintaining 10 % elongation. At the same time, its electrical conductivity increased by 10.7 % compared to the original Al-1.9Mn alloy. The addition of magnesium and silicon elements can achieve a simultaneous enhancement of both the strength and electrical conductivity of the Al-1.9Mn alloy. This holds the potential to meet the usage requirements for cast aluminum alloys used in water-cooled radiator shells.

Enhanced Mechanical Strength and Electrical Conductivity of Al–Ni‐Based Conductor Cast Alloys Containing Mg and Si

Hot tearing and mechanical properties of high electrical and thermal conductivity Al-Fe-Mg-Si-Ni Alloys

Simultaneously improving mechanical properties and electrical conductivity of Al-1.9Mn alloys with different Mg and Si addition

Utilizing Low Solubility, Light Metal Eutectic Systems for Castable, High Electrical/Thermal Conductivity Alloys

Novel approach to high-strength, highly conductive Al-Mg-Si conductor alloys with Ag/Cu additions

Alloying Elements Effects on Electrical Conductivity and Mechanical Properties of Newly Fabricated Al Based Alloys Produced by Conventional Casting Process

Microstructure and Properties of High Strength and High Conductivity Cu-0.4Mg Alloy Processed by Upward Continuous Casting and Multi-pass Drawing

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Production and Characterization of Highly Conductive Aluminum Metal for Electric Motor Applications

Development of a New Al-Fe-Ni Alloy for Electric Vehicle Applications

Advanced wrought Mg-4.5Al-2.5Ca-0.02Mn (at%) alloys with exceptional balance of high thermal conductivity, yield strength, ductility, nonflammability, and corrosion resistance

Pure Alloy Additive or Preliminary Alloy: A Comparative Study on Obtaining High-Strength Copper Magnesium Alloys Designed for Electrical Power Systems

Effect of Ni addition on the microstructure, conductivities and mechanical properties of as-cast Al-Fe alloys

Enhancing Strength-Ductility Synergy and Corrosion Residual Strength of Hot-Rolled Mg-2Zn-0.85Y Alloy

Conductive Al Alloys: The Contradiction between Strength and Electrical Conductivity

Enhanced comprehensive performance via alloying and rheo-diecasting in a semi-solid Al–Si–Fe–Mg–Cu–Sr alloy

Investigations of High-Strength Mg-Al-Ca-Mn Alloys with a Broad Range of Ca+Al Contents

Effect of Mg content on mechanical properties and electrical conductivity of ultrafine-grained Al–Mg–Zr wires produced by ECAP-Conform and drawing

Simultaneous Increase of Electrical Conductivity and Hardness of Al–1.5 wt.% Mn Alloy by Addition of 1.5 wt.% Cu and 0.5 wt.% Zr

Improved Tensile Strength and Electrical Conductivity of the Electrical Conductor Aluminum Alloy 6201