Abstract:Tensile strength is one of the most important mechanical parameters controlling the development of cracks in soil. However, it is frequently neglected in conventional geotechnical practice, because its magnitude is small and difficult to measure relative to other soil strength parameters. In this paper, a newly designed direct tensile test apparatus was employed to measure the tensile strength of an unsaturated clayey soil. A digital image acquisition and analysis system was developed for tensile strain analysis with the help of Particle Image Velocimetry (PIV) and Digital Image Correlation (DIC) techniques. Six groups of samples were compacted at a dry density of 1.7 Mg/m(3) and different water contents (6.5%, 8.5%, 10.5%, 12.5%, 16.5% and 20.5%). Test results show that the tensile strength characteristic curve (tensile strength versus water content) of the compacted unsaturated soil exhibits mono-peak feature. When water content is relatively low, the tensile strength increases with increasing water content and reaches the maximum value at a critical water content of about 9.3%. Then, it declines with further increase in water content. The evolution of tensile strength with water content depends on both suction and microstructure. Based on plotted tensile load-displacement curves, the tensile failure process can be divided into three typical stages which are: stress increasing stage (I), failure developing stage (II) and post-failure stage (III). It is found that the overall tensile failure process presents different patterns controlled by water content. Generally, the failure developing stage (II) lasts longer and the failure ductility is more pronounced when the sample is compacted at higher water content. Using PIV and DIC techniques, the development of displacement direction and strain concentration during tension can be well captured for appreciation of the soil failure mechanism. Based on the strain concentration information, the tensile fracture location and direction can be pre-determined for soil samples.

Application of Image Analysis Technique in Visualization of Failure During the Testing of Materials

Image-Based Structural Dynamic Displacement Measurement Using Different Multi-Object Tracking Algorithms

Assessment of Weld Bead Mechanical Properties During Destructive Testing Using Image Processing by Multivision Technique

A New Non- touch Type Testing Way to Bridge Deflection and Deformation

Magnetomechanical Measurements for Nondestructive Evaluation of Failure in Steel Structural Element

Tensile Strength of Clayey Soil and the Strain Analysis Based on Image Processing Techniques

Techniques of Geomechanical Model Test and Engineering Application

Optimization of the Digital Image Correlation Method for Deformation Measurement of Geomaterials

Non-conventional Small-Scale Mechanical Testing of Materials

Photogrammetric Techniques in Civil Engineering Material Testing and Structure Monitoring

Application of Digital Image Correlation for Strain Mapping of Structural Elements and Materials

Effects of Geometry, Temperature, and Test Procedure on Reported Failure Strains from Simulated Wide Plate Tests

An Internal Digital Image Correlation Technique for High-Strain Rate Dynamic Experiments

An impact imaging method for defect detection and its application in geotechnical engineering

A Digital Image Correlation Technique for Laboratory Structural Tests and Applications: A Systematic Literature Review

Mechanical Strength Evaluation of Elastic Materials by Multiphysical Nondestructive Methods: A Review

Applications of the digital photogrammetry in the studies on shear behavior of concrete beams

Full Field Strain Measurement of Punch-stretch Tests Using Digital Image Correlation

A Miniaturized Device Coupled with Digital Image Correlation for Mechanical Testing

Current Status of Digital Image Based Quantitative Analysis of Internal Structures of Soils, Rocks and Concretes and Associated Numerical Simulation

Application of Impact Imaging Method on Nondestructive Detection of Void Defects in Sandwich-Structured Immersed Tunnel