Nondestructive millimeter-scale void detection for thick steel-shell–concrete interface of immersed tube tunnel: case study
Songhui Li,Guoqing Liu,Yan Zhang,Hongbo Zhao,Shaokong Feng,Fanzi Wu
DOI: https://doi.org/10.1177/14759217231181419
2023-07-07
Structural Health Monitoring
Abstract:Structural Health Monitoring, Ahead of Print. The structural form of sandwich-structured immersed tunnel (SSIT) can be complex. During the casting of self-compacting concrete, creating void defects between the steel shell and concrete interface is not difficult, which can adversely affect the overall safety and service life of the structure. However, detecting millimeter-scale voids covered by a thick steel plate is a technical challenge for current engineering industries. In this study, we proposed a nondestructive millimeter-scale void detection method for SSITs with thick steel shells by combining impact imaging and neutron methods. First, based on the near-source wavefield theory and count rate of thermal neutrons, the void area and depth calculation methods were derived theoretically, and then the coupling detection method and grading criteria for void severity were proposed. Additionally, the void detection performance was validated for a full-scale SSIT model test by blind detection. Finally, the proposed method was applied to the SSIT of the Shenzhen–Zhongshan bridge. The results showed that the proposed method could quantitatively determine the location and distribution pattern of a void; however, it could not accurately determine the void depth. In contrast, the neutron method could accurately calculate the void depth but had a large minimum detectable unit area. The proposed method could effectively compensate for the limitations of both methods. Statistically, the coincidence rate of the model test was 95%, 89%, and 87.5% for the void location, void area, and void depth, respectively, when the error range was ±2 mm. Using this method, 30 tubes in the Shenzhen–Zhongshan bridge were inspected, and by summarizing the void law, suggestions to improve the casting process were proposed, such as adjusting the casting speed. Meanwhile, the void probability decreased significantly. The proposed method provides an important basis for high-quality construction in SSIT projects.
engineering, multidisciplinary,instruments & instrumentation