Application of Digital Image Correlation for Strain Mapping of Structural Elements and Materials

Paweł Bogusz,Wiesław Krasoń,Kamil Pazur

DOI: https://doi.org/10.3390/ma17112577

IF: 3.4

2024-05-28

Materials

Abstract:The strain gauge method and the digital image correlation (DIC) method are commonly employed for measuring strain in tested objects, including material specimens and structural elements. The optical method enables the assessment of 3D strain fields across the entire area of interest, achieved through cameras and advanced software. The study investigates both quasi-static strength tests and more advanced research of structures. It explores full-scale construction testing, featuring highly stressed components of new wagon designs. The paper reviews the benefits and challenges of using the DIC method to measure large-scale elements. Conducting full-scale object testing is characterized by significant complexity, often involving interactions between elements, complex loading conditions, and the influence of friction. Numerous factors affect the measurements. Therefore, to compare both methods, an initially standard shear by tensile test of CFRP composite was analyzed. The analysis of strain maps provides valuable visualization of deformation patterns occurring during construction loading. The strain gauge method was crucial for verifying the quality of the DIC measurements. The results obtained provide a detailed understanding of how the components behave, highlighting the versatility of digital image correlation technology. For strain values of 0.3% and above, a good match was obtained between optical and strain gauge measurements. Below this value, the results have less accuracy. The results obtained provide a detailed understanding of how the components behave, highlighting the versatility of digital image correlation technology. The error comparison and discussion between different measurement scenarios were conducted. The paper presents a developed methodology for measuring strain and displacement state in complex and crucial structural elements. The method can be applied to measurements of heavily loaded components used in the transportation industry; for example, in railways.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the application of Digital Image Correlation (DIC) for strain mapping on structural elements and materials. Specifically, the research aims to provide a detailed understanding of the behavior of these components by using the DIC method to measure the strain field changes of large - scale structural elements during the loading process. In order to verify the effectiveness and accuracy of the DIC method, the research also carried out a comparative analysis with the traditional strain gauge measurement method. The following are the key points mentioned in the paper:

1. **Research Background**:
- Strain measurement techniques are crucial in the mechanical property testing of materials. Commonly used methods include the strain gauge method and Digital Image Correlation (DIC). As a non - contact optical measurement technique, DIC can evaluate the 3D strain field within the entire region of interest and is suitable for laboratory and field tests.
- The research specifically focuses on full - scale structure testing under complex loading conditions, such as high - stress components in the design of new railway carriages.

2. **Research Purposes**:
- Evaluate the effectiveness and challenges of the DIC method in measuring the strain fields of large - scale structural elements.
- Verify the accuracy of the DIC method by comparing the results of DIC and strain gauge measurement methods through standard shear - tensile tests (CFRP composites).
- Provide a detailed strain map analysis to visualize the deformation patterns that occur during the structural loading process.

3. **Research Methods**:
- Use the 4M DIC GOM Aramis system for non - contact full - field measurement.
- Conduct standard shear - tensile tests on CFRP composites and measure simultaneously using the DIC and strain gauge methods.
- Analyze the errors in different measurement scenarios and discuss the advantages and disadvantages of the two methods.

4. **Research Results**:
- For strain values of 0.3% and above, a good match was achieved between the DIC and strain gauge measurement results.
- For strain values below 0.3%, the accuracy of the results was lower.
- Through strain map analysis, valuable insights into the deformation patterns during the structural loading process were provided.

5. **Research Significance**:
- Verified the feasibility and accuracy of the DIC method in measuring the strain fields of large - scale structural elements.
- Provided an effective non - contact measurement means for structure testing under complex loading conditions.
- Combined the advantages of the strain gauge and DIC methods to provide a comprehensive method for evaluating the complex loading conditions of highly loaded structures (such as railway carriage joints).

In summary, the main purpose of this paper is to explore and verify the application of Digital Image Correlation in measuring the strain fields of large - scale structural elements. Through comparison with the traditional strain gauge method, the superiority and limitations of the DIC method are demonstrated.