Abstract:The effect of non-uniform temperature on the sorption-enhanced steam methane reforming (SE-SMR) in a tubular fixed-bed reactor with a constant wall temperature of 600 °C is investigated numerically by an experimentally verified unsteady two-dimensional model. The reactor uses Ni/Al2O3 as the reforming catalyst and CaO as the sorbent. The reaction of SMR is enhanced by removing the CO2 through the reaction of CaO + CO2 → CaCO3 based on the Le Chatelier's principle. A non-uniform temperature distribution instead of a uniform temperature in the reactor appears due to the rapid endothermic reaction of SMR followed by an exothermic reaction of CO2 sorption. For a small weight hourly space velocity (WHSV) of 0.67 h−1 before the CO2 breakthrough, both a low and a high temperature regions exist simultaneously in the catalyst/sorbent bed, and their sizes are enlarged and the temperature distribution is more non-uniform for a larger tube diameter (D). Both the CH4 conversion and the H2 molar fraction are slightly increased with the increase of D. Based on the parameters adopted in this work, the CH4 conversion, the H2 and CO molar fractions at D = 60 mm are 84.6%, 94.4%, and 0.63%, respectively. After CO2 breakthrough, the reaction of SMR dominates, and the reactor performance is remarkably reduced due to low reactor temperature.For a higher value of WHSV (4.03 h−1) before CO2 breakthrough, both the reaction times for SMR and CO2 sorption become much shorter. The size of low temperature region becomes larger, and the high temperature region inside the catalyst/sorbent bed doesn't exist for D ≥ 30 mm. The maximum temperature difference inside the catalyst/sorbent bed is greater than 67 °C. Both the CH4 conversion and H2 molar fraction are slightly decreased with the increase of D. However, this phenomenon is qualitatively opposite to that for small WHSV of 0.67 h−1. The CH4 conversion and H2 molar fraction at D = 60 mm are 52.6% and 78.7%, respectively, which are much lower than those for WHSV = 0.67 h−1.

The effect of non-uniform temperature on the sorption-enhanced steam methane reforming in a tubular fixed-bed reactor

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Dual-enhanced steam methane reforming by membrane separation of H2 and reactive sorption of CO2

Experimental research on hydrogen production from sorption enhanced steam methane reforming

Exergy analysis and CO2 emission evaluation for steam methane reforming

High-Purity Hydrogen Production by CO 2 Addition for Sorption-Enhanced Steam Methane Reforming at a Temperature Below 600 °C

Numerical Analysis on Steam Methane Reforming in a Plate Microchannel Reactor: Effect of Washcoat Properties

Enhancement of methanol steam reforming in a tubular fixed-bed reactor with simultaneous heating inside and outside

Computational simulation of SE-SR of methane in a bench-scale circulating fluidised bed reactor: Insights into the effects of bed geometry design and catalyst-sorbent ratios

Maximum Hydrogen Production Rate Optimization for Tubular Steam Methane Reforming Reactor

Numerical simulation on flow and reaction characteristics for catalytic region in helium-heated steam reformer coupled with HTR-10

Managing Temperature Uniformity of Thermally Integrated Micro Reformers with Different Axial Dimensions: A Detailed Numerical Study

Numerical Simulation of Enhanced Heat Transfer in Tubes Using Methane Steam Reforming

Tri-reforming of methane to syngas over Ni/Al2O3 — Thermal distribution in the catalyst bed

Temperature distribution of SiC bed surface in a large-scale microwave-assisted pyrolysis reactor

The Intrinsic Kinetics of Methane Steam Reforming over a Nickel-Based Catalyst in a Micro Fluidized Bed Reaction System

Thermodynamic Analysis and Optimization for Steam Methane Reforming Hydrogen Production System Using High Temperature Gas-Cooled Reactor Pebble-Bed Module

Double-Tube Reactor Design and Process Optimization for On-Site Steam Methane Reforming Processes

Steam methane reforming driven by the Joule heating

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Optimization of SMR process for syngas production through a solar-assisted thermo-chemical reactor with a multi-layered porous core