Abstract:In the chemical industry, hydrogen (H2) production through steam-methane reforming is a well-established process. With the growing demand for H-fueled vehicles and charging stations, there is a need for compact reformers with efficient heat transfer capabilities. In this study, computational fluid dynamics simulations were performed to evaluate the methane (CH4) conversion and heat transfer efficiency of various reformer designs. These designs include single, double, and triple tubes, each with parallel- and counter-flow configurations between the reformate feed and heat source. The findings revealed substantial disparities in methane conversion between the tube designs and flow configurations. Notably, the triple-tube design outperforms single and double tubes, exhibiting higher methane conversion and improved heat transfer efficiency. This superior performance is attributed to the larger wall area facing the heat source and additional heat recovery from the reformate flowing in the inner annulus. This led to the highest temperature at the catalyst exit among the cases, increasing methane conversion, and the lowest reformate temperature at the reformer tube exit, which is also beneficial for the subsequent water–gas shift reaction process. Installing external fins on the reformer tube provided a more effective enhancement of heat transfer than using internal fins in the catalyst section. Regardless of the tube design employed, the counter-flow configuration consistently enhanced the heat transfer efficiency, resulting in 4.6–11.9% higher methane conversion than the parallel-flow configuration. Consequently, the triple-tube design with the counter-flow configuration achieved the highest methane conversion, offering flexibility in the reformer design, including the potential for lower heat input and a reduced catalyst volume.

Double-Tube Reactor Design and Process Optimization for On-Site Steam Methane Reforming Processes

Dual-enhanced steam methane reforming by membrane separation of H2 and reactive sorption of CO2

Exergy analysis and CO2 emission evaluation for steam methane reforming

Maximum Hydrogen Production Rate Optimization for Tubular Steam Methane Reforming Reactor

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Thermodynamic Analysis and Optimization for Steam Methane Reforming Hydrogen Production System Using High Temperature Gas-Cooled Reactor Pebble-Bed Module

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

Design and performance optimization of diesel engine waste heat recovery methanol reforming hydrogen generation system

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Process intensification aspects for steam methane reforming: An overview

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

Scenario-Based Techno-Economic Analysis of Steam Methane Reforming Process for Hydrogen Production

Design and optimization of a steam methane reformer for ship-based hydrogen production on LNG-fueled ship

On the Modeling of Steam Methane Reforming

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Optimization of SMR process for syngas production through a solar-assisted thermo-chemical reactor with a multi-layered porous core

A high temperature tubular reactor with hybrid concentrated solar and electric heat supply for steam methane reforming