Abstract:Solar concentrators employed in conjunction with highly efficient micro- and meso-channel reactors offer the potential for cost-effective upgrading of the energy content of natural gas, providing a near-term path towards a future solar-fuel economy with reduced carbon dioxide emissions. To fully exploit the heat and mass transfer advantages offered by micro- and meso-channel reactors, highly active and stable natural gas steam reforming catalysts are required. In this paper, we report the catalytic performance of MgAl2O4-supported Rh (5 wt.%), Ir (5 wt.%), and Ni (15 wt.%) catalysts used for steam reforming of natural gas. Both Rh- and Ir-based catalysts are known to be more active and durable than conventional Ni-based formulations, and recently Ir has been reported to be more active than Rh for methane steam reforming on a turnover basis. Thus, the effectiveness of all three metals to perform natural gas steam reforming was evaluated in this study. Here, the Rh- and Ir-supported catalysts both exhibited higher activity than Ni for steam methane reforming. However, using simulated natural gas feedstock (94.5% methane, 4.0% ethane, 1.0% propane, and 0.5% butane), the Ir catalyst was the least active (on a turnover basis) for steam reforming of higher hydrocarbons (C2+) contained in the feedstock when operated at <750 °C. To further investigate the role of higher hydrocarbons, we used an ethane feed and found that hydrogenolysis precedes the steam reforming reaction and that C–C bond scission over Ir is kinetically slow compared to Rh. Catalyst durability studies revealed the Rh catalyst to be stable under steam methane reforming conditions, as evidenced by two 100-hour duration experiments performed at 850 and 900 °C (steam to carbon [S/C] molar feed ratio = 2.0 mol). However, with the natural gas simulant feed, the Rh catalyst exhibited catalyst deactivation, which we attribute to coking deposits derived from higher hydrocarbons contained in the feedstock. Increasing the S/C molar feed ratio from 1.5 to 2.0 reduced the deactivation rate and stable catalytic performance was demonstrated for 120 h when operated at 850 °C. However, catalytic deactivation was observed when operating at 900 °C. While improvements in steam reforming performance can be achieved through choice of catalyst composition, this study also highlights the importance of considering the effect of higher hydrocarbons contained in natural gas, operating conditions (e.g., temperature, S/C feed ratio), and their effect on catalyst stability. The results of this study conclude that a Rh-supported catalyst was developed that enables very high activities and excellent catalytic stability for both the steam reforming of methane and other higher hydrocarbons contained in natural gas, and under conditions of operation that are amendable to solar thermochemical operations.

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

The Characteristics of Sorption Enhanced Steam Methane Reforming for Hydrogen Production on a Complex Catalyst

Hydrogen-Rich Syngas Production via Dry and Steam Reforming of Methane in Simulated Producer Gas over ZSM-5-Supported Trimetallic Catalysts

Process Optimization for Syngas Production from the Dry Reforming of Methane over 5Ni+3Sr/10Zr+Al Catalyst Using Multiple Response Surface Methodology

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Thermodynamic Analysis of Steam Methane Reforming for Hydrogen Production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

H 2 Production from Methane Reforming over Molybdenum Carbide Catalysts: From Surface Properties and Reaction Mechanism to Catalyst Development

On the Modeling of Steam Methane Reforming

H2 Production from Methane Reforming over Molybdenum Carbide Catalysts: from Surface Properties and Reaction Mechanism to Catalyst Development

Optimization of SMR process for syngas production through a solar-assisted thermo-chemical reactor with a multi-layered porous core

Hydrogen Production from Steam Reforming of Hydrocarbons over Alkaline-Earth Metal-Modified Fe- or Ni-Based Catalysts

METHANOL STEAM REFORMING FOR HYDROGEN PRODUCTION OVER Ni‐BASED CATALYSTS: STATE‐OF‐THE‐ART REVIEW AND FUTURE PROSPECTS

Methane and Ethane Steam Reforming over MgAl2O4-Supported Rh and Ir Catalysts: Catalytic Implications for Natural Gas Reforming Application

Hydrogen Production from the Steam Reforming of Biogas over Ni-based Catalyst: the Role of Promoters and Supports

Ni-based bimetallic catalysts for hydrogen production via (sorption-enhanced) steam methane reforming

Steam Reforming of Methane over Nickel-Aluminum Spinel-Derived Catalyst

Reforming Of Methane And Coalbed Methane Over Nanocomposite Nni/Zro2.

Catalytic Hydrogen Production from Methane: A Review on Recent Progress and Prospect

Steam reforming of methane: Current states of catalyst design and process upgrading