Abstract:NiO, NiO-CuO, NiO-TiO2 and NiO-CeO2 were synthesized by the sol-gel method and further processed into catalysts for hydrogen production by the thermocatalytic decomposition of methane. The structures of the metal oxides and catalysts were extensively characterized by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, temperature-programmed reduction and N-2 adsorption. The catalytic performance of the catalysts was evaluated in terms of methane conversion and carbon yield. NiO had a BET surface area of 66 m(2) g(-1). When compared with NiO, NiO-CuO had a lower BET surface area of 13 m(2) g(-1), while NiO-TiO2 and NiO-CeO2 had higher BET surface areas of 161 and 133 m(2) g(-1), respectively. The resulting supported catalysts required increased reduction temperatures and had higher Ni 2p(3/2) binding energies, indicating strong metal-support interactions. For the Ni-Cu catalyst, the introduction of copper resulted in a lower Ni 2p(3/2) binding energy due to the charge transfer from Cu to the adjacent Ni atoms. The Ni catalyst showed a stable methane conversion of 0.39 at 550 degrees C. The presence of copper in the Ni-Cu catalyst increased the working temperature but decreased methane conversion. The Ni-TiO2 and Ni-CeO2 catalysts exhibited stable methane conversions of 0.56 and 0.60, respectively, at 575 degrees C. The lifetime tests of the catalysts revealed that the Ni catalyst had a life span of 600 min at 550 degrees C, resulting in a carbon yield of 121 g C per g Ni. The Ni-Cu, Ni-CeO2 and Ni-TiO2 catalysts had life spans of 670, 790 and 840 min at 575 degrees C, resulting in carbon yields of 171, 204 and 256 g C per g Ni, respectively. The structures of the resulting carbon products were characterized by transmission electron microscopy and X-ray diffraction. It was found that the morphologies of the resulting carbon products were dependent on the type of catalyst used.

Ni-based bimetallic catalysts for hydrogen production via (sorption-enhanced) steam methane reforming

Balancing Ni0 and Ni2+ on Γ‐al2o3 for Efficient Steam Methane Reforming

Ni-Based Catalysts for Low Temperature Methane Steam Reforming: Recent Results on Ni-Au and Comparison with Other Bi-Metallic Systems

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Steam Reforming of Methane over Nickel-Aluminum Spinel-Derived Catalyst

Bi-reforming of Methane with Carbon Dioxide and Steam on Nickel-Supported Binary Mg–Al Metal Oxide Catalysts

Hydrogen or synthesis gas production via the partial oxidation of methane over supported nickel–cobalt catalysts

Ni–Co Bimetallic Catalysts for Hydrogen Production by Steam Reforming Ethanol

Steam methane reforming on a Ni-based bimetallic catalyst: density functional theory and experimental studies of the catalytic consequence of surface alloying of Ni with Ag

Catalytic performance of Ni catalysts for steam reforming of methane at high space velocity

Hydrogen Production from the Steam Reforming of Biogas over Ni-based Catalyst: the Role of Promoters and Supports

Methane Dry Reforming by Ni–Cu Nanoalloys Anchored on Periclase-Phase MgAlO x Nanosheets for Enhanced Syngas Production

Ternary NiMo-Bi liquid alloy catalyst for efficient hydrogen production from methane pyrolysis

Sol–gel synthesis of Ni and Ni supported catalysts for hydrogen production by methane decomposition

Pd+Al2O3-Supported Ni-Co Bimetallic Catalyst for H2 Production through Dry Reforming of Methane: Effect of Carbon Deposition over Active Sites

Ni-based catalysts supported on MgAl<sub>2</sub>O<sub>4</sub> with different properties for combined steam and CO<sub>2</sub> reforming of methane

A Plate-Type Anodic Alumina Supported Nickel Catalyst for Methane Steam Reforming

A review on bi/polymetallic catalysts for steam methane reforming

Steam Reforming of Methane over Ni Catalysts Prepared from Hydrotalcite-Type Precursors: Catalytic Activity and Reaction Kinetics

Ni-Based Molecular Sieves Nanomaterials for Dry Methane Reforming: Role of Porous Structure and Active Sites Distribution on Hydrogen Production

Bimetallic NiFe Nanoparticles Supported on CeO2 as Catalysts for Methane Steam Reforming