Abstract:A two-dimensional steady-state axisymmetric model is developed to analyze the performance of a thermo-chemical porous reactor used for syngas and subsequently hydrogen generation through the steam methane reforming (SMR) process. The finite volume method coupled with kinetics thermo-chemical reaction and local thermal non-equilibrium (LTNE) model with modified P1 approximation is employed to obtain the temperature distribution for both the fluid and porous zones. First, the effects of inlet mass flow rate, inlet steam to methane ratio, porosity, number of pores per inch (PPI), permeability, and reactor length on reactor performance are scrutinized. Next, to optimize the performance of the reactor, an artificial neural network (ANN) is developed to obtain the maximum hydrogen generation rate concerning the effective parameters. Finally, a two-layer porous foam is utilized as the catalyst zone to further improve the performance. Results show that increasing inlet flow rate leads to temperature decline and causes an incomplete reaction. Also, increasing porosity enhances heat absorption at the inlet and decreases radiative heat transfer through the porous foam. At a specified condition ( m ̇ = 0.25 kg.h−1, XCH4/XH2O = 1/3, and PPI = 10), increasing the porosity from 0.6 to 0.8 has increased hydrogen production by 27 %, while by a further increase of porosity to 0.9, hydrogen production decreased by 3 %. Results indicate up to 164 % increment in the performance of the optimal case compared to the base case. Furthermore, employing the two-layer porous foam with different PPIs could further increase hydrogen production, up to 20 %, and reduced the pressure drop.

Maximum Hydrogen Production Rate Optimization for Tubular Steam Methane Reforming Reactor

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Exergy analysis and CO2 emission evaluation for steam methane reforming

Thermodynamic Analysis and Optimization for Steam Methane Reforming Hydrogen Production System Using High Temperature Gas-Cooled Reactor Pebble-Bed Module

Double-Tube Reactor Design and Process Optimization for On-Site Steam Methane Reforming Processes

Thermodynamic Analysis of Steam Methane Reforming for Hydrogen Production

Multi-objective optimization for membrane reactor for steam methane reforming heated by molten salt

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Numerical simulation on flow and reaction characteristics for catalytic region in helium-heated steam reformer coupled with HTR-10

Optimizing hydrogen yield in sorption-enhanced steam methane reforming: A novel framework integrating chemical reaction model, ensemble learning method, and whale optimization algorithm

Topology optimization of catalyst bed structure for a solar steam methane reforming reactor aiming at improved conversion efficiency and hydrogen yield

Combination of Thermodynamic Analysis and Regression Analysis for Steam and Dry Methane Reforming

Optimization of SMR process for syngas production through a solar-assisted thermo-chemical reactor with a multi-layered porous core

Thermal and chemical reaction performance analyses of steam methane reforming in porous media solar thermochemical reactor

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

Research on the Performance of Multi-Inlet Micro-Tubular Reforming Reactor for Hydrogen Production

Application of One-Dimensional Heat and Mass Transfer Model of Helium Heated Reformer Coupled with HTR-10

Design and Performance Study on the Primary & Secondary Helical-Tube Reactor

Design and performance optimization of diesel engine waste heat recovery methanol reforming hydrogen generation system

Experimental Study of the Design and Performance Optimisation of a Self-Heating Methanol On-Board Reforming Reactor for Hydrogen Production