Abstract:In the chemical industry, hydrogen (H2) production through steam-methane reforming is a well-established process. With the growing demand for H-fueled vehicles and charging stations, there is a need for compact reformers with efficient heat transfer capabilities. In this study, computational fluid dynamics simulations were performed to evaluate the methane (CH4) conversion and heat transfer efficiency of various reformer designs. These designs include single, double, and triple tubes, each with parallel- and counter-flow configurations between the reformate feed and heat source. The findings revealed substantial disparities in methane conversion between the tube designs and flow configurations. Notably, the triple-tube design outperforms single and double tubes, exhibiting higher methane conversion and improved heat transfer efficiency. This superior performance is attributed to the larger wall area facing the heat source and additional heat recovery from the reformate flowing in the inner annulus. This led to the highest temperature at the catalyst exit among the cases, increasing methane conversion, and the lowest reformate temperature at the reformer tube exit, which is also beneficial for the subsequent water–gas shift reaction process. Installing external fins on the reformer tube provided a more effective enhancement of heat transfer than using internal fins in the catalyst section. Regardless of the tube design employed, the counter-flow configuration consistently enhanced the heat transfer efficiency, resulting in 4.6–11.9% higher methane conversion than the parallel-flow configuration. Consequently, the triple-tube design with the counter-flow configuration achieved the highest methane conversion, offering flexibility in the reformer design, including the potential for lower heat input and a reduced catalyst volume.

Application of One-Dimensional Heat and Mass Transfer Model of Helium Heated Reformer Coupled with HTR-10

Numerical simulation on flow and reaction characteristics for catalytic region in helium-heated steam reformer coupled with HTR-10

Modeling of the Helium-Heated Steam Reformer for Htr-10

Exergy analysis and CO2 emission evaluation for steam methane reforming

A Numerical Study of Helium-Heated Inorganic Membrane Reformer Coupling to HTGR

Numerical Analysis of Steam Reformer of Steam Methane Reforming Hydrogen Production System Connected with High Temperature Gas Cooled Reactor

Thermodynamic Analysis and Optimization for Steam Methane Reforming Hydrogen Production System Using High Temperature Gas-Cooled Reactor Pebble-Bed Module

Exergy Analysis of Hydrogen Production by Steam Reforming of Hydrocarbons and Its Carbon Emission Evaluation

Thermodynamic Analysis of Steam Methane Reforming for Hydrogen Production

Thermodynamic Analysis of Thermal Efficiency of Htr-10 Hydrogen Production System

Initial Study on Steam Reformer of High-Temperature Gas-Cooled Reactor Powered Steam Methane Reforming Hydrogen Production System

Research on the Performance of Multi-Inlet Micro-Tubular Reforming Reactor for Hydrogen Production

Thermodynamic Analysis of Performance of Steam Methane Reforming Hydrogen Production System Connected with High-Temperature Gas-Cooled Reactor

Maximum Hydrogen Production Rate Optimization for Tubular Steam Methane Reforming Reactor

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Combination of Thermodynamic Analysis and Regression Analysis for Steam and Dry Methane Reforming

Design and optimization of spiral heated tubular dimethyl ether (DME) steam reforming reactor

One Dimensional Reactor Modeling for Methanol Steam Reforming to Hydrogen

Experimental Study of the Design and Performance Optimisation of a Self-Heating Methanol On-Board Reforming Reactor for Hydrogen Production

Heat transfer analysis of a tube-in-tube steam reformer for the application of MGT-SOFC hybrid process

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production