Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

3D SRAM Using Ultrathin Body Nanosheets and Bitline Signal Decoupling

A Comprehensive Study of Nanosheet and Forksheet SRAM for Beyond N5 Node

Hybrid Integration of Gate-All-Around Stacked Si Nanosheet FET and Si/SiGe Super-Lattice FinFET to Optimize 6T-SRAM for N3 Node and Beyond

A 512 Kb SRAM in 65nm CMOS with Divided Bitline and Novel Two-Stage Sensing Technique

A Monolithic-3D SRAM Design with Enhanced Robustness and In-Memory Computation Support

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Highly Compact 1T-1R Architecture (4f(2) Footprint) Involving Fully Cmos Compatible Vertical Gaa Nano-Pillar Transistors and Oxide-Based Rram Cells Exhibiting Excellent Nvm Properties and Ultra-Low Power Operation

Projected performance of Si- and 2D-material-based SRAM circuits ranging from 16 nm to 1 nm technology nodes

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

Compact 3-D-SRAM Memory with Concurrent Row and Column Data Access Capability Using Sequential Monolithic 3-D Integration.

ROBIN: Monolithic-3D SRAM for Enhanced Robustness with In-Memory Computation Support

2D Materials-Based Static Random-Access Memory

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

A 256kb 9T Near-Threshold SRAM With 1k Cells per Bit-Line and Enhanced Write and Read Operations

A Single Bitline Highly Stable, Low Power With High Speed Half-Select Disturb Free 11T SRAM Cell

Highly compact 1T-1R architecture (4F2footprint) involving fully CMOS compatible vertical GAA nano-pillar transistors and oxide-based RRAM cells exhibiting …

Fully CMOS Compatible 3D Vertical RRAM with Self-Aligned Self-Selective Cell Enabling Sub-5Nm Scaling

CFET 6T HD SRAM Designs with 3nm Design Rule