Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Ultrahigh strength, thermal stability and high thermal conductivity in hierarchical nanostructured Cu-W alloy

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Strengthening of Copper with Homogeneous Dispersion of Nanoscale Tungsten Particles Fabricated by Spark Plasma Sintering

Achieving high strength and high conductivity synergy through hierarchical precipitation stimulated structural heterogeneities in a Cu-Ag-Zr alloy

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

A Novel Al–Cu Composite with Ultra‐High Strength at 350 °C via Dual‐Phase Particle Reinforced Submicron‐Structure

Performance of a Hierarchically Nanostructured W–Cu Composite Produced via Mediating Phase Separation

In Situ Synthesis of Core-Shell W-Cu Nanopowders for Fabricating Full-Densified and Fine-Grained Alloys with Dramatically Improved Performance

High hardness and wear resistance of W-Cu composites achieved by elemental dissolution and interpenetrating nanostructure.

Microstructurally Stable Nanocomposite WTaMoNb/Cu Prepared by Mechanical Alloying and Hot Pressing Sintering

Additively Manufactured Copper Alloy with Heterogeneous Nanoprecipitates-Dislocation Architecture for Superior Strength-Ductility-Conductivity Synergy

Revealing the High Strength and High Thermal Stability of a Nano-Lamellar Cu-0.1 At. % Zr Alloy

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Excellent mechanical, thermal and electrical properties of ultrafine W-Cu alloys via freeze-drying technology

Ultra-strong tungsten refractory high-entropy alloy via stepwise controllable coherent nanoprecipitations

Construction of a new n -body potential and multi-scale investigations of the direct alloying behaviors for immiscible W/Cu system

Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity

Effect of W concentration on the thermal stability of Cu-carbon nanotube hybrids

An order-disorder core-shell strategy for enhanced work-hardening capability and ductility in nanostructured alloys

Microstructural evolution of Cu/W nano-multilayers filler metal during thermal treatment

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites