Abstract:A novel heterogeneous lamella (HL) design strategy was proposed to improve mechanical properties of a new cost-effective Fe 35 Ni 35 Cr 25 Mo 5 compositionally complicated alloy (CCA). A HL structure was produced by single-step heat treatment (800 °C for 1h) after cold rolling. This HL structure consists of alternative lamellae regions of coarse-grained FCC matrix (5∼20 μm), and regions containing ultra-fine grains or subgrains (200∼500 nm) together with nanoprecipitates (20-500 nm) and annealing twins. The 800 °C annealed sample with HL structure demonstrated a superior tensile property, with yield strength over 1.0 GPa and ductility of ~13%. Formation of the annealing twins and nanoprecipitates decorated HL structure was a result of the concurrent partial recrystallization and precipitation of σ phase at the shear bands with a high density of lattice defects (e.g. high-density dislocation walls and deformation twins). The latter restricted the growth of recrystallized grains, leading to the formation of ultrafine subgrains within the HL structure. The high yield strength resulted from the multistage hetero-deformation induced (HDI) strengthening and precipitation strengthening associated with heterogeneous lamella structures containing nanoprecipitates. The ductility was originated from the coexistence of multiple deformation mechanisms, which started with dislocation slip and formation of stacking faults at the initial stage, followed by nano-twinning at the higher strain level. This HL design strategy, comprising of composition and thermomechanical process designs, and the resultant microstructure tuning, open a broader window for development of cost-effective CCAs with enhanced performance.

Additively Manufactured Copper Alloy with Heterogeneous Nanoprecipitates-Dislocation Architecture for Superior Strength-Ductility-Conductivity Synergy

Accelerating Discontinuous Precipitation to Increase Strength by Pre-Deformation in Cu-Ni-Si Alloys

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Nanoprecipitates Induced Dislocation Pinning and Multiplication Strategy for Designing High Strength, Plasticity and Conductivity Cu Alloys

Achieving high strength and high conductivity synergy through hierarchical precipitation stimulated structural heterogeneities in a Cu-Ag-Zr alloy

A dual heterogeneous laminated microstructure design for improving the mechanical properties and electrical conductivity of copper alloys

Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy

Additively manufactured heterogeneous precipitation-strengthened high-entropy alloys with high strength and ductility

Superior strength-ductility synergy in three-dimensional heterogeneous-nanostructured metals

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Abnormally high work hardening ability and excellent comprehensive properties of copper alloys due to multiple twins and precipitates

Enhanced strength-ductility synergy in an ultra-strong copper alloy via coherent nanoprecipitates and stress-induced twinning

Additive Manufacturing of Isotropic-Grained, High-Strength and High-Ductility Copper Alloys

Recent development of advanced precipitation-strengthened Cu alloys with high strength and conductivity: A review

Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy

Enhancing the strength-ductility trade-off in a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra fine precipitates, stacking faults, dislocation locks and twins

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

The synergistic effects of heterogeneous structures enhance the strength-ductility of Al-Cu composites

Simultaneously enhancing the strength and electrical conductivity of Cu-Ni-Sn alloy through plastic deformation of an intermetallic compound

Heterogeneous Lamella Design to Tune the Mechanical Behaviour of a New Cost-Effective Compositionally Complicated Alloy

Enhanced strength-ductility synergy in an Al–Cu alloy via Cd-induced hybrid θ′′ + θ′ precipitation