Abstract:Nanostructured metals and alloys often exhibit high strengths but at the expense of hallmark ductility. Through harnessing the far-from-equilibrium processing conditions of laser powder-bed fusion (L-PBF) additive manufacturing, we develop a dual-phase nanolamellar structure comprised of FCC/L1 2 and BCC/B2 phases in a Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 eutectic high-entropy alloy (EHEA), which exhibits a combination of ultrahigh yield strength (>1.4 GPa) and large tensile ductility (∼17%). The deformation mechanisms of the additively manufactured EHEA are studied via in-situ synchrotron X-ray diffraction and high-resolution transmission electron microscopy. The high yield strength mainly results from effective blockage of dislocation motion by the high density of lamellar interfaces. The refined nanolamellar structures and low stacking fault energy (SFE) promote stacking fault (SF)-mediated deformation in FCC/L1 2 nanolamellae. The accumulation of abundant dislocations and SFs at lamellar interfaces can effectively elevate local stresses to promote dislocation multiplication and martensitic transformation in BCC/B2 nanolamellae. The cooperative deformation of the dual phases, assisted by the semi-coherent lamellar interfaces, gives rise to the large ductility of the as-printed EHEA. In addition, we also demonstrate that post-printing heat treatment allows us to tune the non-equilibrium microstructures and deformation mechanisms. After annealing, the significantly reduced SFE and thicknesses of the FCC nanolamellae further facilitate the formation of massive SFs. The dissolution of nano-precipitates in the BCC/B2 nanolamellae reduces spatial confinement and further promotes martensitic transformation to enhance work hardening. Our work provides fundamental insights into the rich variety of deformation mechanisms underlying the exceptional mechanical properties of the additively manufactured dual-phase nanolamellar EHEAs.

Additive Manufacturing of Isotropic-Grained, High-Strength and High-Ductility Copper Alloys

Additive manufacturing of high strength copper alloy with heterogeneous grain structure through laser powder bed fusion

Multiscale microstructure containing nanometer-scale precipitations and stacking faults yields a high-strength Al-5Cu alloy by electron beam freeform fabrication

High Wear Resistance and Mechanical Performance of NiAl Bronze Developed by Electron Beam Powder Bed Fusion

Additively Manufactured Copper Alloy with Heterogeneous Nanoprecipitates-Dislocation Architecture for Superior Strength-Ductility-Conductivity Synergy

Additive manufacturing of titanium alloys with enhanced strength and uniform ductility via multi-element alloying

Simultaneously Enhanced Strength-Ductility of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Via Additive Manufacturing

Process Setup and Boundaries of Wire Electron Beam Additive Manufacturing of High-Strength Aluminum Bronze

Additive manufacturing of an ultrastrong, deformable Al alloy with nanoscale intermetallics

Microstructure and properties research of Al-Zn-Mg-Cu alloy with high strength and high elongation fabricated by wire arc additive manufacturing

High conductive copper alloys for additive manufacturing

Effects of Location on the Microstructure and Mechanical Properties of Cu-8Al-2Ni-2Fe-2Mn Alloy Produced Through Wire Arc Additive Manufacturing

Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing

Characterisation of a High-Performance Al-Zn-Mg-Cu Alloy Designed for Wire Arc Additive Manufacturing

Achieving Novel Copper–steel Joints with a Combination of High Strength and Ductility Reinforced by In-Situ Fe-rich Particles

Improved strength in nickel‐aluminum bronze/steel bimetallic component fabricated using arcing-wire arc additive manufacturing with alternating deposition strategy

Multi-scale annealing twins generate superior ductility in an additively manufactured high-strength medium entropy alloy

Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy

Enhanced mechanical properties in nickel-aluminium bronze alloy via wire arc additive manufacturing with follow-weld forced cooling

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Porous NiTiNb alloys with superior strength and ductility induced by modulating eutectic microregion