Abstract:Constrained by the fabrication of second-generation high-temperature superconducting (2G HTS) tapes, connecting multiple pieces of tapes through joints is often necessary in large-scale applications. In the application of HTS magnets, joint technology is key for achieving closed-loop operation and reducing thermal loads. However, most soldered joints still cannot achieve the expected results. Thus, there is an urgent need to find a method for easily fabricating low-resistance joints. In this study, a low-resistance solder-free copper bonding joint for 2G HTS copper-plated tapes is proposed. The formation mechanism of the joint is presented, and the effects of the bonding temperature and pressure on the electrical and mechanical properties of the copper bonding joint are investigated. The results show that the copper bonding joint can be manufactured by pretreating the tape for 5 min and bonding it in the air for 3 min at 333 MPa at temperatures higher than (or equal to) 150 degrees C or at pressures greater than (or equal to) 250 MPa and 180 degrees C. The characteristic resistance of this joint is approximately 16.8 n Omega cm2, which is approximately one-third lower than that of soldered joints, and it has mechanical properties similar to those of soldered joints under axial tension. We believe that the application of this type of copper bonding joint can significantly aid in the design and manufacturing of large HTS magnets.

Very Low Resistance Al/Cu Joints for Use at Cryogenic Temperatures

Superconducting aluminum heat switch with 3 n$Ω$ equivalent resistance

Microstructure and mechanical property of thick Cu/AlN joints formed at low temperature

Low Contact Resistance Copper-Copper Bonding with Selective Electroless Plating Cobalt Interlayer

Dissimilar Copper-Aluminum Joint Processed by Low-Temperature Nickel Electroplating

Low and Cryogenic Temperature Mechanical Performance and Fracture Behavior of Micro-Scale Cu/Sn–3.0Ag–0.5Cu/Cu Joints with the Decreasing Dimension

Electromagnetic Characterization of Hyperconducting Aluminum Litz Wires at Cryogenic Temperatures

A Low-Temperature Cu-to-Cu Interconnection Method by Using Nanoporous Cu Fabricated by Dealloying Electroplated Cu–Zn

Microwave Loss Reduction in Cryogenically Cooled Conductors

High Performance Heat Conductor with Small Spring Constant for Cryogenic Applications

Cu-Ag Nanocomposite Pastes for Low Temperature Bonding and Flexible Interlayer-Interconnections

Super Plasticity in a Cold-Welded Al-Cu Joint

Molybdenum low resistance thin film resistors for cryogenic devices

Material properties of a low contraction and resistivity silicon-aluminum composite for cryogenic detectors

Properties of selected structural and flat flexible cabling materials for low temperature applications

Ultralow-Contact-Resistance Au-Free Ohmic Contacts with Low Annealing Temperature on AlGaN/GaN Heterostructures

Resistance to Electrical Corrosion of Au-Cu Alloy Coatings for Electronic Contacts

10.1063/1.5084134.2

A Novel Low-Resistance Solder-Free Copper Bonding Joint Using a Warm Pressure Welding Method for REBCO Coated Conductors

Universal Minimum Heat Leak on Low-Temperature Metallic Electrical Leads

Low-temperature diffusion brazing of actively metallized Al 2 O 3 ceramic tube and 5A05 aluminum alloy