Abstract:Efficient and reliable low-temperature cooling technology is one of the important foundations for effective operation of detection electronic components. With the advantages of no moving parts at low temperature, flexibility and simple structure, the Joule-Thomson (JT) cryocooler working at liquid nitrogen temperature has the potential to be applied in thermal management of electronic components which have higher requirements for cooling capacity and reliability nowadays. In this research, the thermodynamic process and thermodynamic models of a JT cryocooler was systematically studied with the goal of obtaining 10 W cooling capacity at liquid nitrogen temperature to meet the significant refrigeration needs of electronic devices. A JT cryocooler working at liquid nitrogen temperature was fabricated and tested based on numerical calculation results. The cooling capacity of 9.68 W @ 83.5 K was obtained at high and low pressure of 10.85 MPa and 0.182 MPa in experiment, respectively and the corresponding mass flow rate was 8.66 × 10 −4 kg/s. Based on experimental results, the accuracy of the heat exchanger and JT orifice thermodynamic models were verified to be reasonable. In terms of high-pressure side outlet temperature and heat exchanger efficiency of the recuperative heat exchanger, the relative deviations between the calculated results and the experimental results were 1.5 K and 1.31 %, respectively. The minimum deviation between the mass flow rate predicted by the JT orifice model and the experimental mass flow rate was only 1.45 %.

Universal Minimum Heat Leak on Low-Temperature Metallic Electrical Leads

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Study of the Minimum Refrigeration Temperature of Regenerative Cryocoolers

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Heat Leakage of a Vertical Test Cryostat for Superconducting Cavity Based on Variable Arranged Radiation Shield

Essential Improvement of the JT Cryocooler Working at Liquid Helium Temperature for Space: Efficient and Lightweight

Thermal resistance in superconducting flip-chip assemblies

Cryogenic Cooling Using Tunneling Structures with Sharp Energy Features.

Very Low Resistance Al/Cu Joints for Use at Cryogenic Temperatures

The Cooling and Safety Design of a Pair of Binary Leads for the MICE Coupling Magnets

A 10 mK hermetic cell for eliminating parasitic heating in cryogen-free dilution refrigerators

Heal: Transfer Through a High Temperature Superconducting Current Lead at Cryogenic Temperatures

Entropy Generation in a High Temperature Superconducting Current Lead

Superconducting aluminum heat switch with 3 n$Ω$ equivalent resistance

Variable Temperature Thermal Conductivity and Conductance Measurements Using a Gifford-McMahon Cryocooler

Dry demagnetization cryostat for sub-millikelvin helium experiments: refrigeration and thermometry

Thermal expansion at low temperatures IV. Normal and superconducting lead

Microwave Loss Reduction in Cryogenically Cooled Conductors

Experimental and numerical study on an open-cycle Joule-Thomson cryocooler working at liquid nitrogen temperature

Design and development of a cryogenic J-T valve for a 2 K cryostat with a single cryocooler