Abstract:Refrigeration systems based on electrocaloric materials are considered as potential alternatives for the current vapor compression–based devices. These systems offer efficiencies closer to the Carnot limits, while also being compatible with miniaturization, compactness, and integration into electronics and wearables. Several prototypes have been proposed that mostly rely on mechanical and fluid motion for heat transfer, which prevent these systems from reaching higher operation frequency, good thermal contact, and low loss. Motionless electrocaloric solid-state devices have so far been conceptualized, but their relative complexity has hampered prototyping. In this work, we study the performance of a solid-state electrocaloric cooler that relies on thermoelectric switches to control heat flow. Our device operation mode minimizes energy consumption by absorbing heat passively through the heat switches. The applied currents, absorbed heat, power consumption, and coefficient of performance are assessed for a wide set of parameters following a steady-state heat propagation model, covering operation temperature, material properties, geometric features, frequency of operation, and material polarization losses. We show that a coefficient of performance (COP) above 1 can be obtained for temperature spans up to 6 K (for different material properties, geometry factors, or electrocaloric loss) and adiabatic temperature changes around 1 K higher than the applied temperature span. Higher temperature spans between 6 to 10 K yield a COP of the order of 0.1, leading to a significant increase in power consumption. These results are intended to guide research into these solid-state devices, in terms of choice of materials, temperatures, and geometry. https://doi.org/10.1103/PhysRevApplied.21.054021 © 2024 American Physical Society

Superconducting aluminum heat switch with 3 n$Ω$ equivalent resistance

Performance Test of Superconducting Switch for Nmr Magnet

A Preliminary Study of 4he Convective Heat Switches

Realisation of de Gennes$'$ Absolute Superconducting Switch with a Heavy Metal Interface

Very Low Resistance Al/Cu Joints for Use at Cryogenic Temperatures

An ultrahigh-impedance superconducting thermal switch for interfacing superconductors to semiconductors and optoelectronics

Giant Magnetothermal Conductivity Switching in Semimetallic WSi$_{2}$ Single Crystals

Thermal Analysis of Persistent Current Switch for Magnetic Resonance Imaging Superconducting Magnet

A Compact Thermal Heat Switch for Cryogenic Space Applications Operating near 100 K

Lead-free room-temperature ferroelectric thermal conductivity switch using anisotropies in thermal conductivities

Aluminum nuclear demagnetization refrigerator for powerful continuous cooling

Conduction Mechanisms at Low- and High-Resistance States in Aluminum/Anodic Aluminum Oxide/Aluminum Thin Film Structure

Atomic Switches of Metallic Point Contacts by Plasmonic Heating.

Multilayered Heater Nanocryotron: A Superconducting-Nanowire-Based Thermal Switch

Solid-state electrocaloric cooler controlled by a thermal switch

Enhanced Superconducting Transition Temperature in Electroplated Rhenium

Superconducting quantum refrigerator: Breaking and rejoining Cooper pairs with magnetic field cycles

Co/Nb/Co low field superconducting spin switch

Experimental Test of Superconductor Fault-Current Switchgear Using Liquid Nitrogen As the Insulation and Arc-Quenching Medium

Superconducting switching due to triplet component in the Pb/Cu/Ni/Cu/Co$_2$Cr$_{1-x}$Fe$_x$Al$_y$ spin-valve structure

Universal Minimum Heat Leak on Low-Temperature Metallic Electrical Leads