Abstract:The superconducting switch wire is a key component in the superconducting magnet. If the superconducting magnet quenches during the operation, the switch will disconnect automatically and avoid the magnet to be damaged. The Cu-30 wt. Ni alloy was used as matrix to manufacture superconducting switch wires because of its high resistance characteristic. However, because of its high hardness and work hardening characteristics, the risk of wire breakage occurred easily in the cold drawing process. Therefore, the way to solve this problem is one of the difficulties in the preparation of the superconducting switch wire. NbTiCu30Ni superconducting switch wires with filaments number of 55 were designed and fabricated by double stacking method, hot extrusion, cold drawing and heat treatment. Then, the NbTiCu30Ni superconducting switch wires with the diameter of 0.500 mm, the Cu30NiSC of 1.1, and the maximum length of 40.68 km were obtained. Finally, the six insulated NbTiCu30Ni wires and one insulated Cu core wire were cabled to the final cable with the diameter of 1.700 mm and the twist pitch of 36 mm. WST has already achieved mass production of NbTiCu30Ni superconducting switch wire. The Ic at 5 T & 4.2 K of the wire is 280.7 A and the line resistance is 2352 mm. At present, the Western Superconducting Technologies Co., Ltd (WST) superconducting switch wires and cables have been successfully delivered to many different Chinese superconducting magnet manufactures and received good reviews and feedback.

Performance Test of Superconducting Switch for Nmr Magnet

Thermal Analysis of Persistent Current Switch for Magnetic Resonance Imaging Superconducting Magnet

Superconducting Joint and Persistent Current Switch for a 7-T Animal MRI Magnet

Research summary of superconducting switch

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Development Of Nb3sn Superconducting Coil Manufacture Technology

A Pulsed Current Charging Mechanism for High Temperature Superconducting Magnets

Development of Electromagnetic Forming Nbti Superconducting Joint

AC Loss Measurement in Nb3Sn Coil for a New Fast Switching-field MR Concept Magnet

Tests on a 6 T Conduction-Cooled Superconducting Magnet

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

Study on the NbTi/Cu30Ni Superconducting Switch Wire Recently in WST

Co/Nb/Co low field superconducting spin switch

Conduction-Cooled Superconducting Magnet with Persistent Current Switch for Gyrotron Application

Thermomagnetic instabilities of Nb<sub>3</sub>Sn wires inside the superconducting solenoid

Design of Superconducting Magnet for Background Magnetic Field

High Magnetic Field Superconducting Magnet for 400 MHz Nuclear Magnetic Resonance Spectrometer

A Superconducting Magnet System for Whole-Body Metabolism Imaging

Full Power Test of Superconductor of BESIII Magnet

RETRACTED: Development of a Cryogenic Test Bed for High Amperage Critical Current Measurement on High Temperature Superconductor Wire

Experimental Study on A Nb3al Insert Coil under High Magnetic Field