Abstract:To fabricate highly reliable Al cables/Cu terminals components and elucidate the microstructure evolution of the joint during ultrasonic welding, ultrasonically welded structures of 50 mm 2 Al cables and 2 mm-thick copper terminals were conducted at welding energies from 1200 J to 2800 J and an amplitude of 54.6 μm in this paper. As the welding energy increased, the degree of plastic deformation of the Al wires gradually increased, the microstructure of the Cu side remained basically unchanged, and the effective contact area of the Cu/Al interface was gradually enlarged, enhancing the coherence between the Al wires, and the Cu-Al interfacial structure changed from an unbonded area to continuous mechanical interlocking. Parallelly, the Al grains transformed from fine serrated to equiaxed and lamellar crystals driven by geometric dynamic recrystallization (GDRX), continuous dynamic recrystallization (CDRX), and dynamic recovery (DRV), forming distinct shear textures of B/ B̅ {111} , Rt Goss{110} , Rt Cube{001} and the recrystallization texture F{111} , and the content of shear textures increased from 2.9% to 17.4%. In addition, the tensile shear failure load of the joint reached 2962 N, which met the requirements of cable installations in the field of new energy vehicles (>1650 N). Fracture analysis showed the fracture location transitioned from the Cu-Al interface to the Al-Al interface with an increase in welding energy from 1600 to 2400 J. This work has theoretical guidance for the continuous promotion of vehicle light-weighting.

Super Plasticity in a Cold-Welded Al-Cu Joint

10.1063/1.5084134.2

Microstructural Evolution and Mechanical Properties of Dissimilar Al–Cu Joints Produced by Friction Stir Welding

Microstructure evolution and mechanical properties of Al/Cu ultrasonic spot welded joints during thermal processing

Microstructure Evolution and Mechanical Properties of Friction Stir Spot Welded Dissimilar Aluminum-Copper Joint

Tailoring Nanotwinned Cu Interlayers for Localizing Anisotropic Plastic Deformation During Low Energy Input Ultrasonic Welding of Robust Cu-Cu Joints

Microstructures and Properties of Aluminum–Copper Lap‐Welded Joints by Cold Metal Transfer Technology

Influence of Welding Combined Plastic Forming on Microstructure Stability and Mechanical Properties of Friction Stir-Welded Al-Cu Alloy

Microstructures and Mechanical Behavior of Aluminum-Copper Lap Joints

Cold Welding of Ag Nanowires by Large Plastic Deformation

Formation mechanisms and mechanical properties in aluminum cables and copper terminals ultrasonic welded joint

Dissimilar Laser Welding of Superelastic NiTi and CuAlMn Shape Memory Alloys

Dynamic Weld evolution during ultrasonic welding of Cu–Al joints

In-Depth Evaluation of Ultrasonically Welded Al/Cu Joint: Plastic Deformation, Microstructural Evolution, and Correlation with Mechanical Properties

Microstructure evolution and mechanical properties of Cu–Al joints by ultrasonic welding

Microstructure and Mechanical Properties of Resistance Heat-Assisted High-Power Ultrasonic Dissimilar Welded Cu/Al Joint

Microstructure and Properties of Aluminum Aa6061-T6 to Copper (Cu)-T2 Joints by Cold Metal Transfer Joining Technology

Microstructure and mechanical properties of Al/Cu dissimilar metals pulsed DE-MIG welding-brazing joint

Interface Microstructure and Mechanical Properties of Copper-Steel Joints with Nickel Transition Layer Prepared by Ultrasonic Additive Manufacturing

Improving the microstructure and mechanical properties of Al-Cu dissimilar joints by ultrasonic dynamic-stationary shoulder friction stir welding