Abstract:Wear and tribocorrosion of passive oxide film covered metals have been studied at the micro and macroscopic scales. Recent advances in nanotechnology have contributed to breakthroughs in understanding of fundamental friction and wear mechanisms of atomically thin 2D materials at the nanoscale. However, for metals and materials without ultra-flat surfaces, a gap in knowledge exists at or below a few nanometers, which is too small for continuum mechanics theories and experiments including conventional atomic force microscopy (AFM) methods, due to resolution limits arising from surface roughness. Here, we report the near-atomic-scale wear of titanium in air and physiological solution from a single atomic layer to beyond the full oxide thickness using an AFM-based tribology method. Sub-nano to nanometer wear of titanium was revealed with different stages of contact pressure dependent wear regions identified as wear depth increased, featured by a transition from atomic wear (below 2.4 GPa) to elasto-plastic driven wear (above 3.6 GPa) at its oxide thickness (3.8 nm) in air. Higher stress was required to generate a similar wear penetration process in PBS compared to air. Tribocorrosion at this scale was grain orientation and voltage-dependent. Our study opens up a new method to achieve reliable angstrom-level resolution wear quantification to advance the understanding of wear and tribocorrosion of metals at the nanoscale. STATEMENT OF SIGNIFICANCE: Experimental tests of wear for metallic biomaterials at the nanoscale are difficult because engineered metal surfacesare never perfectly atomically flat, limiting the resolution of precise wear measurements to a few nanometers scale or more. To systematically address this problem, we have introduced the AFM 'image-wear-image' tribology method and obtained quantitative stress dependent measurement of the near-atomic-scale wear of titanium surfaces in air and tribocorrosion in physiological solution from a single atomic layer to beyond the full oxide film thickness. This allowedto measure sub-nano scale wear by partial removal of oxide. Nanoscale wear has been found to be grain orientation-dependent above the 'atomic scale' wear region. The nano-tribocorrosion of CP-Ti across scales and voltage effects on oxides in physiological solution was studied. Our study opens up a new method for future studies to advance the understanding of sub-nanoscale and nanoscale wear and tribocorrosion phenomenon as well as oxide growth mechanism of metallic biomaterials.

The growth of anti-friction and wear-resistance TiO2 nanotube arrays driven by residual stress

PREPARATION AND TRIBOLOGICAL PROPERTIES OF TiO2-ZrO2 THIN FILMS

Self-lubricated nanoporous TiO 2 -TiN films fabricated on nanocrystalline layer of titanium with enhanced tribological properties

Effect of stress state in different TiN-films on their tribological performances

Sub-nano to nanometer wear and tribocorrosion of titanium oxide-metal surfaces by in situ atomic force microscopy

Effect of Stress State of Different Tin Films on Their Tribological Behavior

Influence of Interfacial Tribo-Chemical and Mechanical Effect on Tribological Behaviors of TiN Film in Different Environments

A novel biomedical TiN-embedded TiO 2 nanotubes composite coating with remarkable mechanical properties, corrosion, tribocorrosion resistance, and antibacterial activity

Improved tribological and thermo‐mechanical properties of epoxy resin with micro‐nano structured ZrO 2 / Ti 3 C 2 particles

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Tailoring Tribological Characteristics in Titanium Alloys by Laser Surface Texturing and 2D Ti3C2Tx MXene Nanocoating

Electrochemical deposition multi-walled carbon nanotube coatings on the surface of Ti6Al4V alloy for enhancing its biotribological properties

Pinning growth of TiN films toward porous Ti matrix

Study of the Tribological Properties of Nano-TiO2 Additive Water-Based Lubricants in Microrolling of Ultrathin Stainless Steel Strips

Surface nanocrystallization and biomedical performance of Ti-Ta laminated composite processed by surface mechanical grinding treatment

Tribocorrosion and Mechanical Properties of Nanotubes Grown on Ti–35Nb Alloy by Anodization

Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti3SiC2

Sliding and Fretting Wear Behavior of Biomedical Ultrafine-Grained TiNbZrTaFe/Si Alloys in Simulated Physiological Solution

Microstructural characterization and wear performance of shot-peened TA15 titanium alloy fabricated by SLM

Ultra-low wear of titanium alloy surface under lubricated conditions achieved by laser texturing and simultaneous nitriding

Friction and Wear Resistance of Nanostructured TiNi Shape Memory Alloy