Abstract:Waterjet peening has become a critical surface treatment technology due to its great potential for improving the surface integrity and fatigue performance of metallic materials. The present study aims to investigate the influence of submerged micro-abrasive waterjet peening (SMA-WJP) on the surface integrity and fatigue properties of TA19 titanium alloy. First, the SMA-WJP with different water pressure (P = 70, 100, and 130 MPa) was conducted on the TA19 specimen. The surface integrity of the specimen before and after SMA-WJP treatment was studied, including the microstructure, surface roughness, microscopic morphology, microhardness, and residual stress. Results showed that the SMA-WJP treated specimen with different water pressure formed a plastic deformation layer with a depth of 24–44 μm, the minimum surface roughness of Ra = 0.363 μm and Sa = 0.95 μm. The depth of the work-hardened layer and compressive residual stress (CRS) layer was approximately 100–150 μm and 160–290 μm. The microstructure evolution on the top surface and sub-surface of the as-received and SMA-WJP treated specimens were characterized by transmission electron microscopy (TEM), which showed that nanocrystals with an average size of 12 nm and high density of dislocations formed on the top surface of the SMA-WJP treated specimen. Finally, stress-controlled high-cycle fatigue (HCF) tests were carried out to study the fatigue behavior of the TA19 titanium alloy before and after SMA-WJP treatment. The HCF life of the specimen is increased by a maximum of 2.72 times. The fatigue fracture surface was examined with scanning electron microscopy (SEM), which revealed that the existence of the plastic deformation layer and large CRS induced by SMA-WJP could effectively inhibit the initiation and propagation of cracks. This work enriches the waterjet peening process by investigating submerged abrasive waterjet peening and brings a new solution for improving the surface integrity and fatigue performance of TA19 titanium alloy.

Microstructural characterization and wear performance of shot-peened TA15 titanium alloy fabricated by SLM

Effects of Ultrasonic Shot Peening on Fatigue Behavior of TA15 Titanium Alloy Fabricated by Laser Melting Deposition

Microstructure Evolution, Hardness, and Tribological Behaviors of Ti-50.8Ni SMA Alloy with Ultrasonic Surface Shot Peening Treatment

Evaluation of Mechanical Behavior and Surface Morphology of Shot-Peened Ti-6Al-4V Alloy

Investigation of Wet Shot Peening on Microstructural Evolution and Tensile-Tensile Fatigue Properties of Ti-6Al-4V Alloy

Effects of Laser Shock Peening on Microstructure and Properties of Ti–6Al–4V Titanium Alloy Fabricated via Selective Laser Melting

Effect of the Conventional Shot Peening and Multiple Shot Peening on Microstructure and Residual Stress of TC17 Titanium Alloy

Effect of Ultrasonic Shot Peening on the Microstructure, Surface Residual Stress, and Wear Properties of Ti-6al-4v Alloy

Influence of submerged micro-abrasive waterjet peening on surface integrity and fatigue performance of TA19 titanium alloy

Effects of shot peening on microstructure evolution and mechanical properties of surface nanocrystal layer on titanium matrix composite

A study on the tribological behavior of AZ31 magnesium alloy sheets processed by temperature-assisted ultrasonic shot peening

Effect of surface high density twin microstructure induced by shot peening on the fatigue behavior of Ti-6Al-4V

Achieving high strength and ductility in selective laser melting Ti-6Al-4V alloy by laser shock peening

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Additive Manufactured Ti-6.5Al-2Zr-1Mo-1V Alloy

Research on surface integrity of Ti-6Al-4V alloy with compound treatment of laser shock peening and shot peening

Residual Stress Distribution And Microstructure Characterization Of Particle Reinforced Titanium Matrix Composite After Shot Peening Treatment: A Review

Microstructure and High-Temperature Tribological Properties of Ti–6Al–4V Alloy Treated by Laser Shock Peening

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

Study of the microstructure and wear properties of Ti-12Mo-6Zr-2Fe alloy fabricated via selective laser melting

Tensile Behavior of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting: Effects of Microstructures and As-Built Surface Quality

High temperature wear performance of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy subjected to laser shock peening