Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Reactivity and stabilization mechanisms of AlH3 crystals by coating of polyvinylidene difluoride

Hydrogen Desorption Behaviors of Γ-Alh 3 : Diverse Decomposition Mechanisms for the Outer Layer and the Inner Part of Γ-Alh 3 Particle

Stability, reactivity and decomposition kinetics of surface passivated α-AlH3 crystals

Directed Stabilization by Air-Milling and Catalyzed Decomposition by Layered Titanium Carbide Toward Low-Temperature and High-Capacity Hydrogen Storage of Aluminum Hydride

Wet Chemical Synthesis of Non-solvated Rod-Like Α'-Alh3 As a Hydrogen Storage Material.

Catalytically ultrathin titania coating to enhance energy storage and release of aluminum hydride via atomic layer deposition

Dehydriding properties of γ-AlH3

Surface Passivation of Aluminum Hydride Particles Via Atomic Layer Deposition

Dehydrogenation Performances of Different Al Source Composite Systems of 2libh4 + M (M = Al, LiAlH4, Li3AlH6).

Kinetics and mechanism of hydrogen release from isothermal decomposition of AlH 3

The Elemental Effects on the H2 Dissociative Adsorption on FeCrAl (110) Surface

The enhanced thermal stability and reduced hygroscopicity of aluminum hydride coated with vinyltrimethoxysilane

Theoretical study on the stability mechanism of a high energy system composed of molecules containing COC or –N3 groups and aluminum hydride

Advanced preparation and processing techniques for high energy fuel AlH3

Destabilized dehydrogenation reaction of LiBH4 by AlF 3

Study on the Dehydrogenation Properties and Reversibility of Mg(Bh4)(2)-Alh3 Composite under Moderate Conditions

Enhanced stability and combustion performance of AlH3 in combination with commonly used oxidizers

Achieving Both High Hydrogen Capacity and Low Decomposition Temperature of the Metastable AlH3 by Proper Ball Milling with TiB2

Construct the α-AlH 3 @Polymers Composite with High Safety and Excellent Stability Properties via In-situ Polymerization

Hydrogen desorption properties of the MgH2-AlH3 composites

Synthesis and Stability of Hydrogen Storage Material Aluminum Hydride