Abstract:Abstract Aluminum can enhance heat release of energetic composite in theory. However, the commonly used micron aluminum powder has several short comings like incomplete reaction and low reaction rate. Meanwhile, outer oxide shell of nano Al particle is thicker than micro Al, which leads to low active aluminum content and insufficient heat release. On the basis of previous research, reported fluoropolymers modified Al particles were compared and suitable F2311was chosen. Sub-micron scale Al (median particle size around 200 nm) was regarded as optimum coated object in consideration of activity content of aluminum powder changing with particle size. The super fine Al powder was prepared by electrical explosion method, and encapsulated in situ by selected fluorine rubber F2311. The experiments on thermal stability demonstrated F2311 coating thickness should be no less than 3.6 nm. These results were further confirmed by EXPLO5 thermo dynamic calculation. Calculated results showed that reaction characters of F2311 encapsulated Al exceeded conventional nano Al regardless of combustion and explosion. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), laser particle size analyzer and X-ray photoelectron spectroscopy (XPS) were used to characterize coated products’ morphology, particle size distribution and interfacial bonding information. The results showed that the coated samples were generally spherical shape, with median particle size of 217.7 nm and coating thickness of 3.6 nm. The coating shell contained a small amount of alumina and aluminum fluoride besides fluoropolymer. The non-isothermal dynamic equations of Al/F2311 and Al/Al 2 O 3 were deduced by TG/DSC simultaneous thermal analysis. Compared with conventional nano-Al, the apparent activation energy of Al/F2311 decreased by 45 kJ/mol and the first exothermic peak temperature was about 10 °C earlier. Moreover, heat release was nearly twice as conventional nano-Al. TG-DSC-MS coupled measurements certified that active Al was enveloped by ‘fluorine atmosphere’ while F2311 decomposed in range of 200–400 °C. Alumina was replaced with aluminum fluoride inside coating layer during 400–550 °C, which broadened the diffusion path and then accelerated the permeation of oxidizing gas. In addition, the exothermic of Al-F was obviously larger than Al-O. Consequently, the oxidation reaction was activated rapidly, especially in initial exothermic period. Fluoropolymer encapsulated sub-micron sized Al was a latent highly activity energetic fuel and a potential candidate for aluminum powder.

Construct the α-AlH 3 @Polymers Composite with High Safety and Excellent Stability Properties via In-situ Polymerization

Preparation and Properties of Pyrotechnic Binder Encapsulated α‐AlH3 Composites by Solvent/Anti‐solvent Method

Microstructure and interaction in aluminum hydrides@polydopamine composites and interfacial improvement with GAP adhesive

Synthesis and characterization of PMMA/Al2O3 composite particles by in situ emulsion polymerization

Reactivity and stabilization mechanisms of AlH3 crystals by coating of polyvinylidene difluoride

Wet Chemical Synthesis of Non-solvated Rod-Like Α'-Alh3 As a Hydrogen Storage Material.

Stability, reactivity and decomposition kinetics of surface passivated α-AlH3 crystals

The enhanced thermal stability and reduced hygroscopicity of aluminum hydride coated with vinyltrimethoxysilane

PDA modification and properties of α-AlH3

A latent highly activity energetic fuel: thermal stability and interfacial reaction kinetics of selected fluoropolymer encapsulated sub-micron sized Al particles

Synthesis of Organic-Inorganic Hybrid Aluminum Hypophosphite Microspheres Flame Retardant and Its Flame Retardant Research on Thermoplastic Polyurethane

High-Energy Composite Fuels with Improved Combustion Efficiency by Using AlH 3 Embedded with Al Particles

Preparation of Al@FTCS/P(VDF-HFP) Composite Energetic Materials and Their Reaction Properties

Enhanced stability and combustion performance of AlH3 in combination with commonly used oxidizers

Preparation and characterization of flame-retardant aluminum hypophosphite/poly(vinyl alcohol) composite

Theoretical study on the stability mechanism of a high energy system composed of molecules containing COC or –N3 groups and aluminum hydride

Preparation of Microencapsulated Aluminum Hypophosphite and Its Flame Retardancy of the Unsaturated Polyester Resin Composites

Aluminum Hypophosphite Microencapsulated to Improve Its Safety and Application to Flame Retardant Polyamide 6.

Preparation of the Organic–inorganic Double‐shell Microencapsulated Aluminum Hypophosphite and Its Improved Flame Retardancy and Mechanical Properties of Epoxy Resin Composites

Facile Synthesis of Aluminum Branched Oligo(phenylphosphonate) Submicro-Particles with Enhanced Flame Retardance and Smoke Toxicity Suppression for Epoxy Resin Composites.

Pickering emulsion to the construction of spherical nAl/PVDF complexes with excellent thermal properties