Abstract:Increasing the performance of an energetic material can be achieved by changing its composition or using additives, such as metal powders. Aluminum hydride (AlH3) exhibits attractive properties, such as high hydrogen/energy storage, relatively good stability, and low dehydrogenation temperature. AlH3 has excellent prospects for use as a component in solid propellants for increasing the specific impulse of rocket engines and effectively reducing the erosion of engine nozzles. In this work, the effect of AlH3 on the energy performance, ignition characteristics, and combustion characteristics of solid propellants, as well as the agglomeration characteristics of metal particles was investigated. It was found that with increasing AlH3 content, the theoretical mass heat of combustion and the theoretical volumetric heat of combustion of the propellants increased, and the combustion efficiency also gradually improved. When the content of AlH3 in the propellant increased from 0.00% to 17.00%, the temperature of the propellant combustion chamber was reduced from 3314.59 to 2957.49 K and the theoretical specific impulse increased from 2584.2 to 2641.7 N center dot s/kg. The average molecular mass of the gas was reduced from 25.54 to 21.54 due to the large amount of hydrogen gas released by the combustion of AlH3. The maximum combustion temperature decreased and the burning rate increased with the gradual replacement of aluminum (Al) in the propellant with AlH3. The maximum combustion temperatures of the pure Al propellant and the pure AlH3 propellant were 2510.5 and 2232.5 K, respectively. The linear burning rates were 0.29 and 0.46 cm/s at 1.0 MPa, respectively. The agglomeration process of AlH3 included three main stages, namely accumulation, aggregation, and agglomeration. With the increase in the AlH3 content, the number of agglomerated particles in the propellant gas-phase flame region decreased continuously. (c) 2023 Published by Elsevier Inc. on behalf of The Combustion Institute.

High-Energy Composite Fuels with Improved Combustion Efficiency by Using AlH 3 Embedded with Al Particles

Advanced preparation and processing techniques for high energy fuel AlH3

Effect of AlH3 on the Energy Performance and Combustion Agglomeration Characteristics of Solid Propellants

Enhanced stability and combustion performance of AlH3 in combination with commonly used oxidizers

Thermal decomposition reaction mechanism and combustion performance of AlH3/AP energetic composite

Combustion performance modulation and agglomeration inhibition of HTPB propellants by fine Al/oxidizers integration

Effects of AlH 3 particle size and loading on the combustion and agglomeration of solid propellants

Preparation of high-energy Al-Li alloy powders with enhanced compatibility and combustion performance by dense fluorosilane polymer composite coating

Insights into the Fragmentation of Aluminum Hydride and Its Effect on Combustion and Agglomeration of HTPB Propellant

Energy output characteristics and safety design of Al-AlH 3 composite dust for energetic material additive

Preparation of anhydrous FeF 2 by solvothermal method and its application in composite energetic materials

Thermal Oxidation and Heterogeneous Combustion of AlH3 and Al: A Comparative Study

Combustion behavior and mechanism of molecular perovskite energetic material DAP-4-based composites with metal fuel al

Effect of complex metal hydride on the thermal decomposition behavior of AP/HTPB-based aluminized solid rocket propellant

Preparation of Al@FTCS/P(VDF-HFP) Composite Energetic Materials and Their Reaction Properties

Fully resolved simulations of micro-unit composite fuel in solid propellants: Al@AP

Preparation and study on combustion performance of AP@ZrH2 core-shell composite energetic materials with high volume energy density

Effect of Mass Ratio on Flame Propagation Behaviors and Thermal Radiation Performance of Al–AlH3 Composite Dust

In situ preparation of Al@3-Perfluorohexyl-1, 2-epoxypropane@glycidyl azide polymer (Al@PFHP@GAP) high-energy material

Iron/aluminum nanocomposites prepared by one-step reduction method and their effects on thermal decomposition of AP and AN