Abstract:Aluminum hydride (AlH3) exhibits attractive properties, such as high hydrogen/energy storage, relatively good stability, and low dehydrogenation temperature. Thus, AlH3 has appreciable prospects as a component in solid propellant for promoting the specific impulse of rocket engines and for effectively reducing the erosion of engine nozzles. The TG-MS, SEM, XRD, XPS, and EDS results show that the thermal reaction of AlH3 is divided into three stages: (1) Dehydrogenation (below 210 °C, 2AlH3→2Al+3H2) starts from the inherent defects on the surface with an incomplete decomposition due to the passivation reaction in which an amorphous Al2O3 layer is formed to encapsulate the contained hydrogen. This is accompanied by nucleation and growth of Al nuclei from the outer particles to the inner particles and the formation of H2O via oxidation of the generated hydrogen. (2) The primary oxidation of Al (210–650 °C, 4Al+3O2→2γ-Al2O3) is attributed to a discontinuous layer of γ-Al2O3, which is transformed from amorphous Al2O3 that results in the reaction of naked residual Al and O2. (3) The secondary oxidation of residual Al (above 650 °C, 4Al+3O2→2α-Al2O3) occurs because of the crystal conversion from γ-Al2O3 to α-Al2O3, which leads to the shrinkage of the oxide shell and to the formation of cracks. Also, melting of residual Al breaks the shell, and this induces further oxidation. The results obtained for the microscopic kinetics mechanisms of dehydrogenation and oxidation of AlH3, show a clear direction for research regarding modifications of AlH3 as the theoretical foundation and are beneficial for the wide use of AlH3 in applications such as solid propellant as an energetic material and as a hydrogen source for fuel cells.

Advanced preparation and processing techniques for high energy fuel AlH3

Effect of AlH3 on the Energy Performance and Combustion Agglomeration Characteristics of Solid Propellants

Enhanced stability and combustion performance of AlH3 in combination with commonly used oxidizers

High-Energy Composite Fuels with Improved Combustion Efficiency by Using AlH 3 Embedded with Al Particles

Thermal Oxidation and Heterogeneous Combustion of AlH3 and Al: A Comparative Study

Aluminum hydride as a hydrogen and energy storage material: Past, present and future

Effects of AlH 3 particle size and loading on the combustion and agglomeration of solid propellants

Ultra-fast response behavior of aluminum hydride (AlH3) in a quasi-detonation environment

Synthesis and Stability of Hydrogen Storage Material Aluminum Hydride

Study on dehydrogenation and oxidation kinetics mechanisms of micron α-AlH3 in an oxidative atmosphere

Stability, reactivity and decomposition kinetics of surface passivated α-AlH3 crystals

Wet Chemical Synthesis of Non-solvated Rod-Like Α'-Alh3 As a Hydrogen Storage Material.

Thermal Reaction and Combustion Mechanism of AlH3 with Different Particle Sizes

Theoretical study on the stability mechanism of a high energy system composed of molecules containing COC or –N3 groups and aluminum hydride

Insights into the Fragmentation of Aluminum Hydride and Its Effect on Combustion and Agglomeration of HTPB Propellant

Directed Stabilization by Air-Milling and Catalyzed Decomposition by Layered Titanium Carbide Toward Low-Temperature and High-Capacity Hydrogen Storage of Aluminum Hydride

Co-Electrolysis-Assisted Decomposition of Hydroxylammonium Nitrate–Fuel Mixtures Using Stainless Steel–Platinum Electrodes

Dehydrogenation Performances of Different Al Source Composite Systems of 2libh4 + M (M = Al, LiAlH4, Li3AlH6).

Aluminum hydride for solid-state hydrogen storage: Structure, synthesis, thermodynamics, kinetics, and regeneration

Dehydriding properties of γ-AlH3