Abstract:Experimental analyses of depth distributions of phase-specific residual stresses after deep rolling were carried out by means of laboratory X-ray diffraction and neutron diffraction for the two duplex steels X2CrNiMoN22-5-3 and X3CrNiMoN27-5-2, which differ significantly in their ferrite to austenite ratios. The aim of the investigation was to elucidate to which extent comparable results can be achieved with the destructive and the non-destructive approach and how the process induced phase-specific micro residual stresses influence the determination of the phase- and {hkl}-specific reference value d0, required for evaluation of neutron strain scanning experiments. A further focus of the work was the applicability of correction approaches that were developed originally for single-phase materials for accounting for spurious strains during through surface neutron scanning experiments on coarse two-phase materials. The depth distributions of macro residual stresses were separated from the phase-specific micro residual stresses. In this regard, complementary residual stress analysis was carried out by means of incremental hole drilling. The results indicate that meaningful macro residual stress depth distributions can be determined non-destructively by means of neutron diffraction for depths starting at about 150–200 μm. Furthermore, it was shown that the correction of the instrumental surface effects, which are intrinsic for surface neutron strain scanning, through neutron ray-tracing simulation is applicable to multiphase materials and yields reliable results. However, phase-specific micro residual stresses determined by means of neutron diffraction show significant deviations to data determined by means of lab X-ray stress analysis according to the well-known sin2ψ-method.

Neutron Diffraction Measurements of Residual Stresses for Ferritic Steel Specimens over 80 mm Thick

Neutron diffraction methods for the study of residual stress fields

Neutron and X-ray Diffraction Analysis of Macro and Phase-Specific Micro Residual Stresses in Deep Rolled Duplex Stainless Steels

X-ray Residual Stress Analysis of Nitrided Low Alloyed Steels

Neutron Diffraction Residual Stress Study of a AA2219-T87 Self-Reacting Friction Stir Weld

Recent Progress Of Residual Stress Distribution And Structural Evolution In Materials And Components By Neutron Diffraction Measurement At Rsnd

Neutron Strain Scanning of a Small Welded Austenitic Stainless Steel Plate

Determination of the Through-Thickness Residual Stress in Thick Duplex Stainless Steel Welded Plate by Wavelength-Dependent Neutron Diffraction Method

In Situ Neutron Diffraction Measurement of Residual Stress Relaxation in a Welded Steel Pipe During Heat Treatment

Non-destructive Measuring Internal Residual Stress along Radial Direction in Cold Hole Expansion Strengthening A100 Steel Using Short-wavelength Characteristic X-ray Diffraction

Neutron Diffraction Measurement and Numerical Simulation to Study the Effect of Repair Depth on Residual Stress in 316L Stainless Steel Repair Weld

In-Situ Neutron Diffraction Investigation of Austenite → Ε-Martensite → Α-Martensite Transformation and Its Dynamic Effect on Macroscopic Serration in a 13%mn Metastable Austenitic Steel

In situ stress measurement of fiber reinforced composite in low temperature state by neutron diffraction

Quantitative Study of Residual Strain and Geometrically Necessary Dislocation Density Using HR-EBSD Method

Neutron Diffraction Measurements of a Thermally Fatigued Single Crystal Superalloy

Residual Stress Modeling and Advanced Diffraction Measurements of 347H Steel Weldments

Neutron Bragg edge tomography characterisation of residual strain in a laser-welded Eurofer97 joint

Neutron diffraction residual stress determinations in titanium aluminide component fabricated using the twin wire-arc additive manufacturing

Simulation of Residual Stress Neutron Diffractometer Experiment with Fe Sample

Micrometre Scale Residual Stress Measurement in Fusion Boundary of Dissimilar Steel Welded Joints Using Nanoindenter System

Neutron Diffraction Research of Residual Stress in Metal Plates Deposited on Rigid Substrate by DLMD Method