Abstract:Cogging torque results in speed and torque ripple in permanent magnet synchronous motors (PMSMs), thereby leading to undesirable vibration and acoustic noise. By analyzing the expression of cogging torque, the main parameters that affect the cogging torque are determined as the harmonic of air-gap permeance and air-gap flux density. The methods involving stator auxiliary slots and optimization of pole-arc coefficient are used to alter the two parameters to reduce the cogging torque. Taking a typical interior permanent magnet synchronous motor (IPMSM) as an example, the effects of the number, position, and size of auxiliary slots on cogging torque are analyzed. Additionally, the effect of the pole-arc coefficient on cogging torque is analyzed, and the optimal pole-arc coefficient that can effectively reduce cogging torque is calculated. Meanwhile, in order to ensure the output performance of the motor, an evolutionary algorithm (EA) is adopted to optimize the rotor structure. The results show that without compromising the motor performance, cogging torque and torque ripple are significantly reduced, and the waveform of the line-line back electromotive force (EMF) becomes more sinusoidal, which effectively enhances the output performance of the motor. Finally, based on the optimized structural parameters, a prototype is manufactured, and the accuracy of the optimized results is verified by experiments.

Investigation of Additional Radial Air Gaps on Cogging Torque in Modular Permanent Magnet Machines Based on Taguchi Method

Analytical Cogging Torque Prediction for Surface-Mounted PM Machines Accounting for Different Slot Sizes and Uneven Positions

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines with Static and Rotating Eccentricities

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Segmented Stators

Analysis and Reduction of Cogging Torque in Dual PM Vernier Machine with Irregular Split Teeth

Influence of Slot and Pole Number Combinations on Cogging Torque in PM Machines with Interaction of Tooth Bulge and Rotor Eccentricity

Research on Cogging Torque Reduction Based on Multi-Parameter Optimization of Auxiliary Slots and Pole-Arc Coefficient

Analysis and Reduction Methods of Cogging Torque in Dual PM Vernier Machines with Unevenly Distributed Split Teeth

Methods to Improve the Cogging Torque Robustness Under Manufacturing Tolerances for the Permanent Magnet Synchronous Machine

Influence of Manufacturing Tolerance in Ring Magnet on Cogging Torque of Surface Permanent Magnet Synchronous Machine

An Approach for Estimating the Cogging Torque Performance Considering Manufacturing Uncertainties for the IPM Machine

Analytical Analysis of Cogging Torque in Permanent Magnet Machines With Unequal North and South Poles, with Particular Reference to Consequent Pole Machines