Abstract:Purpose – The purpose of this paper is to evaluate the cogging torque in a surface-mounted permanent magnet (SPM) machine with both uniformly and non-uniformly segmented stator cores and to find out the optimal solution of stator core segmenting. Design/methodology/approach – The cogging torque with segmented stators is synthesized from a single slot model, and analytical prediction is given to analyze the cogging torque with both uniformly and non-uniformly segmented stators. Finite element method (FEM) is used to figure out the electromagnetic field and validate the analytical prediction. Moreover, models with various shapes and positions of connecting tongues between the stator core segments are explored to achieve the optimal design. Findings – The cogging torque is found to be greatly related to the number of segments and the electrical angle between adjacent additional air gaps caused by the tolerance of stator segments. Different shapes of the connecting tongues are tested and proved to be of great importance to the flux density, both radial and tangential, and therefore affect the cogging torque. Finally, position of the connecting tongues is perceived to have little influence on the performance of machine. Practical/implications – By utilizing analytical prediction and FEM calculation, the optimal solution is discussed to minimize the cogging torque in the SPM machine from the perspective of the stator core segmentation. Originality/value – This paper establishes formula of cogging torque with segmented stators and predicts the variation of cogging torque with analytical method. Besides, different combinations of segments are compared and measures to reduce the cogging torque produced by the segmentation are proposed.

Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Segmented Stators

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Analytical Cogging Torque Prediction for Surface-Mounted PM Machines Accounting for Different Slot Sizes and Uneven Positions

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines with Static and Rotating Eccentricities

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Cogging Torque in Spm Machine with Segmented Stator

Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines

Cogging torque reduction based on segmented skewing magnetic poles with different combinations of pole‐arc coefficients in surface‐mounted permanent magnet synchronous motors

Investigation of Additional Radial Air Gaps on Cogging Torque in Modular Permanent Magnet Machines Based on Taguchi Method

A Novel Structure of Doubly Salient Permanent Magnet Machine in Square Envelope

Analysis of the cogging torque behavior of a two-phase axial flux permanent magnet synchronous machine

Torque Analysis of Permanent-Magnet Flux Switching Machines with Rotor Step Skewing

Analytical Energy-Based Approaches for Cogging Torque Calculation in Surface-Mounted PM Motors

Analytical Cogging Torque and Unbalanced Magnetic Force Calculations in Slotted Surface-PM Machines Assuming Finite Iron Permeability