Abstract:One of the parameters required for a high-performance drive of a surface-mounted permanent magnet synchronous motor (SPMSM) operating in the flux-weakening region is the torque ripple reduction. In general, the torque ripple results from many reasons, such as the machine structure, oscillations of measured speed, etc. Hence, this article proposes an optimized strategy that works in conjunction with a variable switching frequency pulsewidth modulation algorithm to reduce the torque ripple peak. For the modulating algorithm, the updated frequency changes linearly with the desired torque ripple and its predicted maximum peak. For the proposed strategy, the reflection of proportional-integral (PI) parameters is observed at the torque ripple caused by the current ripples. Therefore, a robust method for adjusting PI parameters is proposed that relies on the improved fitness function that can minimize the regulators' error and maximize the drive stability bandwidth in the flux-weakening region. This objective function is optimized offline using a genetic algorithm optimization technique. Meanwhile, a third-order generalized integral flux observer is applied in this article, providing evidence of torque ripple reduction. For driving in the flux-weakening region, the reference magnitude of the duty cycles can produce the required d-axis reference current to prevent the saturation of current controllers. Finally, comprehensive simulations and experiments are presented to validate the proposed strategy effectively. In comparison with the conventional method, the proposed strategy can reduce the copper and switching losses simultaneously and control the current and speed in the flux-weakening region efficiently.

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Analytical Cogging Torque Prediction for Surface-Mounted PM Machines Accounting for Different Slot Sizes and Uneven Positions

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

Method for Reducing Cogging Torque Based on Magnet Skewing in Disc-Type Permanent Magnet Motors

Analytical Energy-Based Approaches for Cogging Torque Calculation in Surface-Mounted PM Motors

Cogging Torque Reduction of Permanent Magnet Motor Based on Particle Swarm Optimization Algorithm

Cogging torque reduction based on segmented skewing magnetic poles with different combinations of pole‐arc coefficients in surface‐mounted permanent magnet synchronous motors

Detent-Force Analysis and Reduction of Modular Permanent-Magnet Linear Synchronous Motors with Non-overlapping Windings

Analysis and Optimization of Torque Ripple Reduction Strategy of Surface-Mounted Permanent-Magnet Motors in Flux-Weakening Region Based on Genetic Algorithm

Cogging Torque Reduction in Permanent Magnet Flux-Switching Machines by Rotor Teeth Axial Pairing

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique

Reduction of Cogging Torque in Permanent Magnet Flux-Switching Machines

Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Segmented Stators