Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Optimization of cogging torque in outer rotor Permanent Magnet Synchronous Motors based on particle swarm algorithm

Method for Reducing Cogging Torque Based on Magnet Skewing in Disc-Type Permanent Magnet Motors

Cogging torque reduction based on segmented skewing magnetic poles with different combinations of pole‐arc coefficients in surface‐mounted permanent magnet synchronous motors

Cogging Torque Reduction of Permanent Magnet Motor Based on Particle Swarm Optimization Algorithm

A Study on Cogging Torque Reducing Method of BLDC Motors

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Combined Methods for Torque Variation Reduction of High-Speed FSPM

Detent-Force Analysis and Reduction of Modular Permanent-Magnet Linear Synchronous Motors with Non-overlapping Windings

Improved Stator/Rotor-Pole Number Combinations for Torque Ripple Reduction in Doubly Salient PM Machines

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

Reduction of Cogging Torque in Permanent Magnet Flux-Switching Machines

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II