Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

Influence of Manufacturing Tolerance in Ring Magnet on Cogging Torque of Surface Permanent Magnet Synchronous Machine

Analytical Cogging Torque Prediction for Surface-Mounted PM Machines Accounting for Different Slot Sizes and Uneven Positions

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines with Static and Rotating Eccentricities

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines

Methods to Improve the Cogging Torque Robustness Under Manufacturing Tolerances for the Permanent Magnet Synchronous Machine

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

A Manufacturing Oriented Topology Optimization Methodology for Permanent Magnet Synchronous Motor

Influence of Slot and Pole Number Combinations on Cogging Torque in PM Machines with Interaction of Tooth Bulge and Rotor Eccentricity

Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Segmented Stators

Investigation of Additional Radial Air Gaps on Cogging Torque in Modular Permanent Magnet Machines Based on Taguchi Method

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

An Approach for Estimating the Cogging Torque Performance Considering Manufacturing Uncertainties for the IPM Machine

Industrial-scale motor cogging torque control for a high-volume motor manufacturing