Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

A Manufacturing Oriented Topology Optimization Methodology for Permanent Magnet Synchronous Motor

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

A Novel Derivative Free Methodology for Multi-Material Topology Optimization Based on Projective Transformations and Boolean Operations

A Novel Methodology for Robust Topology Optimization Considering Manufacturing Errors and Topology Deviations

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

A Multi-Objective Topology Optimization Methodology and Its Application to Electromagnetic Actuator Designs

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Performance Comparison and Optimization of a PMSM Based on Hybrid-Type Permanent Magnet with Two Kinds of Rotor Topology

Multi-Objective Optimization Design and Analysis of V-Shape Permanent Magnet Synchronous Motor

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

Multi-Material Topology Optimization with Continuous Magnetization Direction for Permanent Magnet Synchronous Reluctance Motors

Optimization Design of Outer-rotor Permanent Magnet Synchronous Motor

Multi Objective Optimization of Permanent Magnet Synchronous Motor Based on Taguchi Method and PSO Algorithm

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

Novel multi-material topology optimization method for multi-segmented permanent magnet motors

Optimization Design of Permanent Magnet Synchronous Motor Based on Multi-Objective Artificial Hummingbird Algorithm

Optimization of cogging torque in outer rotor Permanent Magnet Synchronous Motors based on particle swarm algorithm

Analysis and Research on No-Load Air Gap Magnetic Field and System Multi-Objective Optimization of Interior PM Motor

Design and Analysis of an Interior Permanent Magnet Synchronous Motor for a Traction Drive Using Multiobjective Optimization