Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies
Evans, D.,Azar, Z.,Wu, L.J.,Zhu, Z.Q.
DOI: https://doi.org/10.1049/cp.2010.0201
2010-01-01
Abstract:This paper investigates the influence of machine's parameters on the design and optimisation of permanent magnet (PM) brushless ac machines having three different rotors, viz. surface PM (SPM), I-shaped interior PM (IPM-I) and V-shaped interior PM (IPM-V), and with non-overlapping double/single layer windings. The IPM-V angle δ between two magnet pieces within a pole was found to have a significant impact on the optimum split ratio. Smaller values of angle δ have smaller optimal split ratios and higher torque. However, for torque per magnet volume, a global optimal split ratio and angle δ can be found within limits. Increasing the magnet thickness for interior PM machines results in a decrease in the magnet width due to geometric limitations and hence there exists an optimal magnet thickness for maximum torque, which is obvious in IPM-V machines. Comparison reveals that the IPM-I machine presents the widest constant power-speed region due to its larger d-axis inductance and low back-EMF. Single layer windings produce larger average torque and d-axis inductance, hence wider power-speed range operation, however exhibits larger torque ripples.