Abstract:A permanent magnet synchronous motor (PMSM) is a crucial device for power conversion in an energy system. The cogging torque of the PMSM is a crucial output characteristic, the robustness of which affects the operational reliability of the energy system. Therefore, the robust design optimization (RDO) of cogging torque has aroused widespread concern. There are several challenges in designing a robust cogging torque PMSM. In particular, some design parameters contain repetitive units, and the finite element analysis (FEA) method is time-consuming. State-of-the-art RDO methods usually treat these uncertainties from repetitive units as the same parameter, which neglects the fluctuation of the manufacturing process and cannot obtain a robust solution for the cogging torque of the motor efficiently and accurately. In order to solve this issue, an approximate modeling method based on manufacturing uncertainties analysis for RDO is proposed in this paper. First, the peak-to-peak value of cogging torque (Tcpp) is used to characterize the cogging torque, which is decoupled to an ideal component and fluctuation component produced by the center values and manufacturing tolerances of design parameters. The design of experiments (DoE) and simulation of the two components are carried out. Then, these two components are approximated separately, and the approximate model of Tcpp is obtained by adding the two components. Finally, the proposed approximate model is embedded into the RDO algorithm, and the PMSM design scheme for good Tcpp robustness is obtained. The effectiveness of the proposed method is verified through a case study of the PMSM.

Methods to Improve the Cogging Torque Robustness Under Manufacturing Tolerances for the Permanent Magnet Synchronous Machine

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Analytical Cogging Torque Prediction for Surface-Mounted PM Machines Accounting for Different Slot Sizes and Uneven Positions

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines with Static and Rotating Eccentricities

An Approach for Estimating the Cogging Torque Performance Considering Manufacturing Uncertainties for the IPM Machine

A Method for Evaluating the Worst-Case Cogging Torque Under Manufacturing Uncertainties

Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines

Influence of Manufacturing Tolerance in Ring Magnet on Cogging Torque of Surface Permanent Magnet Synchronous Machine

Research on Cogging Torque Reduction Based on Multi-Parameter Optimization of Auxiliary Slots and Pole-Arc Coefficient

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Robust Design Optimization of the Cogging Torque for a PMSM Based on Manufacturing Uncertainties Analysis and Approximate Modeling

Parametric Modeling and Sensitivity Analysis of a Hairpin Winding Permanent Magnet Synchronous Motor for Robust Design Optimization

Robustness-oriented Design Optimization Approach for Cogging Torque of Batch Production PMSM

A Manufacturing Oriented Topology Optimization Methodology for Permanent Magnet Synchronous Motor

Methods to Reduce the Computational Burden of Robust Optimization for Permanent Magnet Motors

A computationally efficient surrogate model based robust optimization for permanent magnet synchronous machines

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines