Numerical and experimental investigation on the integrate performance of axial flow cooling fan and heat exchanger
Zhiao Wang,Jiaxin Liu,Haidong Wang,Bingyuan Zhang,Weimin Liu,Enver Doruk Özdemir,Mehmet Haluk Aksel
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122814
IF: 6.4
2024-03-02
Applied Thermal Engineering
Abstract:This work examines the integrate performance of a 380-mm-width × 30-mm-height louvered fin-and-tube heat exchanger combined with a 280-mm-diameter, 26°-pitch-angle axial flow cooling fan disturbance. First, the swirl velocity was derived from the fan outlet. Second, a 400-fps high-speed camera visual experiment was performed to confirm the findings. Following that, Colburn factor and Fanning friction factor with the disturbance were discussed based on the numerical replica of the combination experiment in FLUENT. Furthermore, their correlations from an L21(21 2 ) orthogonal test were reported using regression analysis and joint hypotheses test. Effectiveness-number of transfer units method assessed the deviation between experimental and predicted outcomes. The results indicated that swirl velocity might account for the performance deviation of the combination under a maximum error of 8.9 % at 500 r/min. Moreover, the numerical air volume and the pressure loss of the fan confirmed a heat transfer decrease of 10.3 % and a pressure loss increase of 11 % for the heat exchanger under disturbance. The correlation involving more fan variables could realize a Colburn factor of 86 % within an error of 4.1 % and a friction factor of 100 % within an error of 0.34 %, respectively. The maximum of 4.5 % at 600 r/min for total heat transfer quantity and 6.8 % at 500 r/min for pressure loss also encourage a correlation application above a Reynolds number in the range of 73.99–423.07, a radius in the range 46.66–140 mm, a resultant angle in the range 51.37–73.93°, and a fan speed in the range 300–800 r/min. Hopefully, this work might offer a scientific basis for further systematic research on the combined fan and heat exchanger and supplement related research.
energy & fuels,engineering, mechanical,thermodynamics,mechanics