Abstract:<p>Mercury intrusion porosimetry (MIP) is a vital method for assessing the pore structure of cement-based porous materials (CBPMs), but its applicability remains to be clarified. Herein we employed X-ray computed tomography (X-CT) to trace the entrapped mercury in two hardened cement pastes (HCPs) after MIP tests to reassess the method for pore structure characterization. Four different maximum pressures were employed in the MIP tests. Results show that the maximum intrusion pressure had no significant influences on the threshold pore sizes, but impacted the mean pore sizes that were linked to the pore intervals. X-CT can measure the mercury drops entrapped in macro pores. A pore model with the pore structure of thick chamber connected with thin throats was proposed to associate the links between the MIP and X-CT data. The combined uses of MIP and X-CT provide new insights in better understanding MIP results and the possibility for quantitative pore structure characterization of CBPMs.</p>

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to re - evaluate the applicability of the mercury intrusion method (MIP) in characterizing the pore structure of cement - based porous materials (CBPMs), especially to address some controversies and deficiencies in the MIP method by using X - ray computed tomography (X - CT) to monitor mercury entrapment. Specifically, the paper aims to: 1. **Re - evaluate the applicability of MIP**: By combining X - CT technology, researchers hope to better understand the limitations and potential biases of MIP when measuring the pore structure of CBPMs. For example, the "ink - bottle effect" (i.e., MIP can only measure the pore channels rather than the pore cavities) has always been a hot topic in academic discussions. 2. **Evaluate the influence of different maximum intrusion pressures**: Study the influence of different maximum intrusion pressures on the characteristic parameters of the pore structure (such as average pore diameter, threshold pore diameter, etc.) to determine whether these parameters are affected by pressure changes. 3. **Establish the connection between MIP and X - CT data**: Propose a model to correlate the data of MIP and X - CT, so as to more comprehensively understand the results of these two methods and provide new insights for quantitatively characterizing the pore structure of CBPMs. 4. **Verify the "ink - bottle effect"**: Verify the existence of the "ink - bottle effect" and its influence on the MIP results through experimental data, especially its performance on the capillary pore scale. To achieve these goals, researchers have carried out the following work: - Use hardened cement pastes (HCPs) with two different water - to - cement ratios (w/c = 0.4 and w/c = 0.5) as experimental samples. - Immediately perform X - CT scanning after the MIP test to track the retention of mercury in the pores. - Design four different maximum intrusion pressure levels (7,500 psi, 15,000 psi, 30,000 psi, and 60,000 psi) to evaluate the influence of pressure on the pore structure parameters. Through these experiments, researchers hope to provide a basis for the improvement of the MIP method and a more accurate method for characterizing the pore structure of CBPMs.

Reassessment of mercury intrusion porosimetry for characterizing the pore structure of cement-based porous materials by monitoring the mercury entrapments with X-ray computed tomography

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Tracing Mercury Entrapment in Porous Cement Paste after Mercury Intrusion Test by X-ray Computed Tomography and Implications for Pore Structure Characterization

Visualization of mercury percolation in porous hardened cement paste by means of X-ray computed tomography

X-Ray microtomography of mercury intruded compacted clay: An insight into the geometry of macropores

A reappraisal of the ink-bottle effect and pore structure of cementitious materials using intrusion-extrusion cyclic mercury porosimetry

Investigation into the mercury intrusion porosimetry (MIP) and micro-computed tomography (μCT) methods for determining the pore size distribution of MX80 bentonite pellet

Investigations on pore-structure in cementitious materials using gas intrusion porosimetry

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Analysis of Pore Structure, Contact Angle and Pore Entrapment of Blended Cement Pastes from Mercury Porosimetry Data

Assessment on Pore Structure of Western Sichuan Reservoir Through Mercury Intrusion Porosimetry

Ink-bottle effect in mercury intrusion porosimetry of cement-based materials

Comparison of Mercury Intrusion Porosimetry and multi-scale X-ray CT on characterizing the microstructure of heat-treated cement mortar

Pore Structure of Cement Pastes Through NAD and MIP Analysis

Understanding the Microstructure of Mortars for Cultural Heritage Using X-ray CT and MIP

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Comprehensive evaluation and interpretation of mercury intrusion porosimetry data of coals based on fractal theory, Tait equation and matrix compressibility

Applications of mercury intrusion capillary pressure for pore structures: A review

Optimization of Mercury Intrusion Capillary Pressure Measurement for Characterizing the Pore Structure of Tight Rocks

Characterizing the shape, size, and distribution heterogeneity of pore-fractures in high rank coal based on X-ray CT image analysis and mercury intrusion porosimetry