Characterizing the shape, size, and distribution heterogeneity of pore-fractures in high rank coal based on X-ray CT image analysis and mercury intrusion porosimetry

Xianglong Wang,Jienan Pan,Kai Wang,Taoyuan Ge,Jiang Wei,Wei Wu
DOI: https://doi.org/10.1016/j.fuel.2020.118754
IF: 7.4
2020-12-01
Fuel
Abstract:<p>The shape, size, and surface characters of pore-fractures in coal are the basis for understanding the occurrence and migration of coalbed methane (CBM), which requires quantitative characterization. In this study, X-ray CT image analysis was used to quantitatively characterize the size distribution and volume contribution of pore-fractures in coal at three cohesive-scales (nanometer-scale, micrometer-scale, and macro-scale). A shape factor was introduced to divide the pore-fracture shapes into five types: spherical, tubular, slot, and slit pores and flat fractures, which mainly develop in diameters of 0.2–0.8 μm, 0.8–10 μm, 10–30 μm, 30–40 μm, and 50–240 μm, respectively. Compared to mercury intrusion porosimetry (MIP), it was found that the pore diameters measured by X-ray CT image analysis were relatively larger, the pore volume contribution increased then decreased with increasing pore diameter, and pores with diameters of 10–30 μm were the largest. When the pore diameter is 0.2–1 μm and 30–40 μm, the specific surface area by X-ray CT image analysis was 20.38% and 51.53% higher than that from MIP. When the pore diameter is 1–10 μm, the specific surface area measured by the two methods were similar. When the pore diameter is 10–30 μm, the specific surface area by MIP was 43.02% higher than that from X-ray CT image analysis. X-ray CT image analysis is more suitable for testing the morphologies than MIP. Additionally, these shape models of pore-fractures in this work can provide some understanding for the permeability calculations.</p>
energy & fuels,engineering, chemical
What problem does this paper attempt to address?
### Problems the Paper Aims to Solve This paper aims to quantitatively characterize the coal pore-fracture system at different scales through X-ray Computed Tomography (X-ray CT) image analysis methods, and to explore its morphology, size, and distribution heterogeneity. Specifically: 1. **Research Background**: - As an unconventional oil and gas reservoir, coal seams have a complex pore-fracture system and exhibit strong heterogeneity. - The structure and morphology of pores and fractures are fundamental to the study of coalbed methane (CBM) adsorption, diffusion, and seepage. 2. **Research Objectives**: - Quantitatively characterize the morphology, size, and surface features of the pore-fracture system in coal. - Compare the differences between X-ray CT image analysis and Mercury Intrusion Porosimetry (MIP) in measuring pore volume and specific surface area. - Provide a reliable morphological basis to better understand the diffusion and seepage mechanisms of CBM. 3. **Main Findings**: - The distribution and development of the pore-fracture system exhibit significant heterogeneity. Micron-scale pores (including mesopores and macropores) contribute the most to the total volume (52.50%), followed by fractures (43.97%), while nano-scale pores, despite being the most numerous (91.32%), contribute the least to the total volume (3.53%). - By introducing a shape factor algorithm, the pores and fractures are classified into five types: spherical pores, tubular pores, slot pores, fissure pores, and planar fractures, each corresponding to different diameter ranges. - The pore volume contribution measured by X-ray CT image analysis increases first and then decreases with increasing pore diameter, while the specific surface area decreases rapidly. In certain pore diameter ranges, the specific surface area measured by X-ray CT image analysis is significantly higher than that measured by MIP. Through these studies, the authors hope to provide more accurate and detailed pore-fracture structure information for the development and evaluation of coalbed methane.