Abstract:This study employed a comprehensive approach utilizing X-ray diffraction, scanning electron microscopy (computed), computed tomography (CT) three-dimensional scanning, uniaxial compressive testing, acoustic emission (AE), and digital image correlation to investigate the micromorphology, mechanical properties, macro–microscopic fractal characteristics, failure modes, and mineral composition changes in acid–base coal samples from underground reservoirs. The findings from this study indicate that, in acidic environments, calcite undergoes acidolysis to form calcium chloride (CaCl 2 ), whereas kaolinite reacts with alkaline substances to produce albite (Na 2 Al 2 Si 2 O 8 ). The average elastic modulus of the coal samples treated with strong acids or alkalis decreased by 51.08% and 38.17%, respectively, when compared to the naturally dried samples. After strong acid treatment (pH = 2), the post-peak modulus decreased to its lowest value of 1.78 GPa. The fracture threshold in the plastic phase of the acidic coal samples decreased by approximately 60% when compared to that of the naturally dried samples, with the cumulative AE energy reaching a maximum of 2.46 × 10 10 aJ. CT image segmentation revealed that with higher H + concentrations, the sliced fracture fractal dimension increased from 1.01 to 1.25, indicating enhanced fracture disorder. The evolution of the spatial and energy fractal dimensions of the AE, analyzed using the box-counting method and correlation dimension, showed that in strong acidic and alkaline environments, the spatial fractal dimension before the peak failure was higher, pre-disposing the formation of highly disordered and smaller-scale fractures. During the fracture development stage, the time-series energy correlation dimension of the acid–base coal samples experienced two significant fluctuations, with a rapid decrease before the peak, indicating a transition from disorderly expansion to orderly fracturing. In the final stage of fracturing, the strongly acidic samples predominantly developed microcracks. The stronger the acidity or alkalinity, the more likely it is that high-energy (greater than 10 4 aJ) AE shear events will occur, with the mixed mode of tensile and shear failure tending to concentrate in the areas of high shear strain, thereby enhancing the macroscopic fragmentation orderliness. This research is crucial in regard to the safety assessment of dam bodies or coal pillars in acidic and alkaline coal mines in Northwestern China, particularly for predicting their stability.

Micro‐structure analysis on fracture network in high rank coals

Quantitative characterization of pore-fracture structure of medium and high-rank coal based on micro-CT technology

3D visualization of tectonic coal microstructure and quantitative characterization on topological connectivity of pore-fracture networks by Micro-CT

Multi-Scale Characterization of Pores and Fractures in Coals with Different Coal-Body Structures from the Jincheng Mine, Qinshui Basin, Northern China

3D microfracture network and seepage characteristics of low-volatility bituminous coal based on nano-CT

Micrometer-scale pores and fractures in coals and the effects of tectonic deformation on permeability based on fractal theory

Nano-CT measurement of pore-fracture evolution and diffusion transport induced by fracturing in medium-high rank coal

Experimental investigation on the fractal feature of pore-fracture systems in bituminous coal and its influencing factors

Experimental Study of the Fracture Network Expansion Mechanism and Three-Dimensional Reconstruction Characteristic of High-Rank Coal in Guizhou Province, China

Assessing the impact of pore‐fracture structures on permeability sensitivity in tectonic coal using computerized tomography scanning

Characterizing the shape, size, and distribution heterogeneity of pore-fractures in high rank coal based on X-ray CT image analysis and mercury intrusion porosimetry

Reconstruction of 3D Micro Pore Structure of Coal and Simulation of Its Mechanical Properties

Porosity and Fracture Changes of Coal under Uniaxial Strain Conditions Based on the X-ray Microscopic Imaging Technology

Influences of hydraulic fracturing on microfractures of high-rank coal under different in-situ stress conditions

Anisotropy of fracture and permeability in high-rank coal analyzed using digital rock physics

Reconstruction and seepage simulation of a coal pore-fracture network based on CT technology

A Clustered Fractal Discrete Fracture Network Model For Fractured Coal

Fractal Analysis and Classification of Pore Structures of High-Rank Coal in Qinshui Basin, China

Nanoscale Quantitative Characterization of Microstructure Evolution of Partly Graphitized High Rank Coal: Evidence from AFM and HRTEM

Fracture Development Patterns and Micro–Macrostructural Fractal Characteristics of Acid–Base Coal Samples

Experimental research on different metamorphic grades of coal bodies with macro–mesoscopic structure fractal characteristics