Abstract:In this contribution, the microstructure features of cement mortar exposed to various temperatures (105 °C, 200 °C, 400 °C, 600 °C, 800 °C) was investigated by combining Mercury Intrusion Porosimetry (MIP) and multi-scale X-ray computed tomography. The influence of exposure temperature and resolution of X-ray CT on the determination of microstructure parameters of heat-treated mortar was focused. Based on results of MIP test, it was found the porosity and pore size increased slightly when the exposure temperature varied from 105 °C to 200 °C and significant pore coarsening and micro-damage occurred once the temperature exceeded 400 °C. Bimodal pore size distribution (PSD) of the heat-treated mortar specimens was observed when the temperature reached 400 °C. To interpret the results of MIP test, the microstructure of heat-damaged mortar specimens was imaged using X-ray CT with a reconstructed voxel size of ~4.0 μm3 and then local volume inside the specimen was focused and scanned with a reconstructed voxel size of 1.5 μm3. A method was proposed to select proper threshold based on the MIP results for segmenting the void space from the X-ray CT images. The fracture aperture, 2D/3D fractal dimension, connectivity and tortuosity of the heat-damaged mortar specimens were further determined at different scale. By analyzing the fracture aperture determined from X-ray CT images, it was found the bimodal PSD revealed by MIP test can be associated with the creation of thermal micro-fractures. The fractal dimension increased remarkably when exposure temperature was raised from 400 °C to 600 °C while it varied slightly from 600 °C to 800 °C. Linear dependences between the fractal dimension and the volume fraction/tortuosity of micro-scale pores and fractures were found. The scale-dependent fractal properties of the heat-treated mortar were revealed with the capillary pressure data measured by MIP. The fractal dimension of micro-scale pores and fractures measured by MIP exhibited good consistency with that determined based on by X-ray CT images with a reconstructed voxel size of 1.5 μm3.

Investigation into the mercury intrusion porosimetry (MIP) and micro-computed tomography (μCT) methods for determining the pore size distribution of MX80 bentonite pellet

Reassessment of mercury intrusion porosimetry for characterizing the pore structure of cement-based porous materials by monitoring the mercury entrapments with X-ray computed tomography

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Effects of Pore-Size Distribution on the Gas Diffusion Coefficient and Gas Permeability of Compacted Manufactured Sand Tailing-Bentonite Mixtures

Tracing Mercury Entrapment in Porous Cement Paste after Mercury Intrusion Test by X-ray Computed Tomography and Implications for Pore Structure Characterization

X-Ray microtomography of mercury intruded compacted clay: An insight into the geometry of macropores

Hydraulic Conductivity of Compacted Manufactured Sand Tailings–bentonite Mixtures: a New Hydraulic Barrier Material

Laboratory Experiment on Formation of MICP Horizontal Seepage-Reducing Body in Confined Aquifer for Deep Excavation

Structural evolutions of MX80 bentonite pellet/powder mixtures under wetting and suction-controlled oedometer loading

Visualization of mercury percolation in porous hardened cement paste by means of X-ray computed tomography

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

A reappraisal of the ink-bottle effect and pore structure of cementitious materials using intrusion-extrusion cyclic mercury porosimetry

Comparison of Mercury Intrusion Porosimetry and multi-scale X-ray CT on characterizing the microstructure of heat-treated cement mortar

Characterization of Pore Size Distribution and Water Transport of UHPC Using Low-Field NMR and MIP

Investigations on pore-structure in cementitious materials using gas intrusion porosimetry

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Investigation of the hydro-mechanical behaviour of GMZ bentonite pellet mixtures

Analysis of Pore Structure, Contact Angle and Pore Entrapment of Blended Cement Pastes from Mercury Porosimetry Data

Applying Octamethylcyclotetrasiloxane As a Probe Liquid for Characterizing the Pore Size Distribution of Oil-Bearing Tight Sandstones by Nuclear Magnetic Resonance Cryoporometry

Quantitative Two/three-Dimensional Spatial Characterization and Fluid Transport Prediction of Macro/micropores in Gaomiaozi Bentonite

Optimization of Mercury Intrusion Capillary Pressure Measurement for Characterizing the Pore Structure of Tight Rocks