X-Ray microtomography of mercury intruded compacted clay: An insight into the geometry of macropores

Shengyang Yuan,Xianfeng Liu,Yongxin Wang,Pierre Delage,Patrick Aimedieu,Olivier Buzzi
DOI: https://doi.org/10.1016/j.clay.2022.106573
2024-07-30
Abstract:Soil properties, such as wetting collapse behavior and permeability, are strongly correlated to the soil microstructure. To date, several techniques including mercury intrusion porosimetry (MIP), can be used to characterize the microstructure of soil, but all techniques have their own limitations. In this study, the features of mercury that penetrated and has been entrapped in the pore network of the specimens through MIP testing were investigated by X-Ray microtomography (X-$\mu$CT), in order to give an insight into the geometry of macropores and possible ink-bottle geometry. Two conditions of water content and density were selected for the compacted Maryland clay. The distribution and geometry features of mercury entrapped in the microstructure after MIP were characterized and pore size distributions were also reconstructed. The results suggest that, for the two conditions studied in this paper, macropores were evenly distributed within the specimens, and most of them with a non-spherical shape, and with aspect ratio (ratio between the maximum and minimum thickness along a given segment) smaller than three. Different dominant entrance pore size of macropore was obtained from MIP and X-$\mu$CT, due to the specific experimental protocol used in tests and the effect of ink-bottle geometry. Only the large pore bodies with high aspect ratio were imaged in X-$\mu$CT, due to the extrusion of mercury during the process of depressurization and subsequent sample preparation for X- $\mu$CT. But entire pore space was accessible in MIP. The difference in dominant entrance pore size was more significant for specimens with lower void ratio due to a more pronounced aspect ratio.
Materials Science,Classical Physics
What problem does this paper attempt to address?
The paper aims to address issues in the characterization of soil microstructure, specifically focusing on the geometric characteristics of macropores in expansive soils. Specifically, the paper utilizes X-ray micro-computed tomography (X-μCT) technology combined with Mercury Intrusion Porosimetry (MIP) to investigate the distribution, shape, and ink-bottle geometry of macropores in compressed Maryland clay samples under different moisture content and density conditions. The study found that macropores under both test conditions are uniformly distributed within the samples, mostly non-spherical, and have an aspect ratio of less than 3. Additionally, due to mercury extrusion during the experimental process and subsequent sample handling, X-μCT images only showed macropores with high aspect ratios, while MIP was able to detect the entire pore space. The research revealed differences in the entrance sizes of macropores under different conditions and analyzed the reasons for these differences. Overall, the paper provides a new perspective for understanding the 3D morphology of macropores in expansive soils by combining MIP and X-μCT technologies.