Abstract:In this contribution, the microstructure features of cement mortar exposed to various temperatures (105 °C, 200 °C, 400 °C, 600 °C, 800 °C) was investigated by combining Mercury Intrusion Porosimetry (MIP) and multi-scale X-ray computed tomography. The influence of exposure temperature and resolution of X-ray CT on the determination of microstructure parameters of heat-treated mortar was focused. Based on results of MIP test, it was found the porosity and pore size increased slightly when the exposure temperature varied from 105 °C to 200 °C and significant pore coarsening and micro-damage occurred once the temperature exceeded 400 °C. Bimodal pore size distribution (PSD) of the heat-treated mortar specimens was observed when the temperature reached 400 °C. To interpret the results of MIP test, the microstructure of heat-damaged mortar specimens was imaged using X-ray CT with a reconstructed voxel size of ~4.0 μm3 and then local volume inside the specimen was focused and scanned with a reconstructed voxel size of 1.5 μm3. A method was proposed to select proper threshold based on the MIP results for segmenting the void space from the X-ray CT images. The fracture aperture, 2D/3D fractal dimension, connectivity and tortuosity of the heat-damaged mortar specimens were further determined at different scale. By analyzing the fracture aperture determined from X-ray CT images, it was found the bimodal PSD revealed by MIP test can be associated with the creation of thermal micro-fractures. The fractal dimension increased remarkably when exposure temperature was raised from 400 °C to 600 °C while it varied slightly from 600 °C to 800 °C. Linear dependences between the fractal dimension and the volume fraction/tortuosity of micro-scale pores and fractures were found. The scale-dependent fractal properties of the heat-treated mortar were revealed with the capillary pressure data measured by MIP. The fractal dimension of micro-scale pores and fractures measured by MIP exhibited good consistency with that determined based on by X-ray CT images with a reconstructed voxel size of 1.5 μm3.

Tracing Mercury Entrapment in Porous Cement Paste after Mercury Intrusion Test by X-ray Computed Tomography and Implications for Pore Structure Characterization

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Reassessment of mercury intrusion porosimetry for characterizing the pore structure of cement-based porous materials by monitoring the mercury entrapments with X-ray computed tomography

Visualization of mercury percolation in porous hardened cement paste by means of X-ray computed tomography

X-Ray microtomography of mercury intruded compacted clay: An insight into the geometry of macropores

A reappraisal of the ink-bottle effect and pore structure of cementitious materials using intrusion-extrusion cyclic mercury porosimetry

Ink-bottle effect in mercury intrusion porosimetry of cement-based materials

Analysis of Pore Structure, Contact Angle and Pore Entrapment of Blended Cement Pastes from Mercury Porosimetry Data

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Assessment on Pore Structure of Western Sichuan Reservoir Through Mercury Intrusion Porosimetry

Investigation into the mercury intrusion porosimetry (MIP) and micro-computed tomography (μCT) methods for determining the pore size distribution of MX80 bentonite pellet

Investigations on pore-structure in cementitious materials using gas intrusion porosimetry

Pore Structure of Cement Pastes Through NAD and MIP Analysis

Comparison of Mercury Intrusion Porosimetry and multi-scale X-ray CT on characterizing the microstructure of heat-treated cement mortar

Applications of mercury intrusion capillary pressure for pore structures: A review

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Comprehensive evaluation and interpretation of mercury intrusion porosimetry data of coals based on fractal theory, Tait equation and matrix compressibility

Optimization of Mercury Intrusion Capillary Pressure Measurement for Characterizing the Pore Structure of Tight Rocks

Quantitative study on the influence of fly ash content, saturation degree and interface transition zone on the permeability of cement-based materials

Mercury porosimetry and x-ray microtomography for 3-dimensional characterization of multilayered paper: Nanofibrillated cellulose, thermomechanical pulp, and a layered structure involving both