Abstract:Directionally solidified Al 2 O 3 /Y 3 Al 5 O 12 (YAG), Al 2 O 3 /YAG/ZrO 2 , Al 2 O 3 /GdAlO 3 (GAP), Al 2 O 3 /GAP/ZrO 2 and Al 2 O 3 /ZrO 2 eutectic/non eutectic ceramics were prepared with laser zone melting. Their microstructure, phase component and shape were investigated. The results indicated that the molar ratio of Zr 4+ to rare earth ions (Y 3+ , Gd 3+ ) in the ZrO 2 phase of the ternary eutectic was closed to 2:1. The free energy of chemical reaction was the key to determine the precipitation order of phase. The growth of the firstly-precipitated phase could be divided into the formation of ordered Bravais lattice composed by the oxygen ions, the diffusion of metal cations in this lattice and the change of phase morphology. The unfilled cation gap might be a fast channel for the ion transport. On the same growth plane, the nucleation of the later-precipitated phase began only after the firstly-precipitated phase was fully formed. The triangular was the main ion arrangement way for the stable nucleation and growth of phases. The effects of the precipitation temperature, the phase size, the eutectic type and the growth rate on the microstructure were discussed. This improved theory provided a more reasonable explanation for the formation of rod-shaped, layered, triangular, Chinese script (CS) and cellular microstructures, which might be of significance to regulate the morphology of microstructures.

The oriented growth behavior of α-Al2O3 grains in alumina-mullite biphasic fibers

Grain boundary segregation for enhancing the thermal stability of alumina-mullite diphasic fibers by La2O3 addition

Mechanism of grain refinement and growth for the continuous alumina fibers by MgO addition

Effect of silica sol on phase transition of alumina-mullite fibers

Effect of the alumina and silica source mixing procedure on the microstructural evolution of alumina-mullite composite fibers prepared by sol–gel method

Stabilizing nanocrystalline oxide nanofibers at elevated temperatures by coating nanoscale surface amorphous films.

Microstructure evolution and mechanical behavior of a mullite fiber heat‐treated from 1100 to 1300°C

Structure evolution and thermal stability of La_2O_3-doped mullite fibers via sol-gel method

Effect of residual carbon on the phase transformation and microstructure evolution of alumina-mullite fibers prepared by sol-gel method

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Kinetics and mechanisms for the densification and grain growth of the α-alumina fibers isothermally sintered at elevated temperatures

Effects of SiO2 Addition on Phase Transition and Microstructure Evolution of Alumina Fibers Prepared Using the Sol-Gel Method

Study Of The Nucleation And Growth Behavior Of Al2o3-Sio2/Ld11 Composites Fabricated By Squeeze Casting Method

Preparation and Thermal Stability of Zirconia-Doped Mullite Fibers Via Sol-Gel Method

Removal of hydroxyl groups and its influence on the microstructures evolution of alumina-mullite fibers fabricated by sol-gel process

Inhibited Grain Growth Through Phase Transition Modulation Enables Excellent Mechanical Properties in Oxide Ceramic Nanofibers up to 1700°C

Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker

Fibrous Monolithic Ceramic with a Single Alumina Phase: Fracture and High‐temperature Tribological Behaviors

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Phase field molding on the morphologies and growth kinetics of grain boundary ferrite allotriomorphs

Microstructural and mechanical characterization of a mullite fiber