Abstract:Polydimethylsiloxane (PDMS) is a significant polymer that has attracted great attention for its wide applications and unique physical/chemical properties. Furthermore, flexible PDMS-based optical devices are broadly used in many fundamental applications. However, the current methods of tuning the optical properties of polymers and fabricating polymer-based optical devices still have some issues. Therefore, it is essential to develop a simple and effective method for tuning the optical properties of polymers and fabricating polymer-based optical devices, especially for the highly transparent PDMS. Here, a feasible method of tuning the optical properties of PDMS films and fabricating elastic volume Bragg diffraction gratings (VBDGs) by picosecond ultraviolet (ps-UV) laser-induced photochemical reactions was proposed. Firstly, polymeric materials' swelling and penetration behavior was utilized to introduce copper ions Cu(II) and photoinitiator benzophenone (BP) into the commercially available PDMS films. Subsequently, under the ps-UV laser irradiation (355 nm), the laser-induced photochemical reactions occurred between Cu(II), BP, and PDMS polymer chains, resulting in the formation of copper oxides (CuO/Cu 2 O) within the PDMS matrix. As a result, the optical properties (absorption, transmissivity, and refractivity) of the PDMS films changed without any structural damage or surface corrugation. In a wide range of wavelengths (200–800 nm), the absorption and refractive index of the PDMS films were enhanced while the transmittance decreased. The PDMS films with the desired optical properties (refractive index n = 2.25–2.68) could be obtained by controlling solution concentrations and laser treating parameters. With this method, the elastic VBDG (grating period: 20 μm) was fabricated, which showed good flexibility and the ability to be tuned by external stress (the strain of 0%-60%).

Precision cutting of PDMS film with UV-nanosecond laser based on heat generation-diffusion regulation

Stretchability improvement of flexiable electronics by laser micro-drilling array holes in PDMS film

Study on the ultraviolet nanosecond laser ablation and heat-affected zone of polydimethylsiloxane films based on comprehensive surface analysis

Tuning the optical properties of polydimethylsiloxane films and fabricating elastic volume Bragg diffraction gratings by picosecond ultraviolet Laser-induced photochemical reactions

Processing and Profile Control of Microhole Array for PDMS Mask with Femtosecond Laser

Cold Laser Micro-Machining of PDMS as an Encapsulation Layer for Soft Implantable Neural Interface

PI Film Laser Micro-Cutting for Quantitative Manufacturing of Contact Spacer in Flexible Tactile Sensor

Modification and activation of the surface of medical-grade PDMS after irradiation by ultrashort laser pulses

Precision cutting of polyvinyl chloride film by ultraviolet nanosecond laser

Development of Femtosecond Laser Direct-Writing Optical Waveguide Devices in Flexible PDMS

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

Cutting of polyethylene terephthalate (PET) film by 355 nm nanosecond laser

Femtosecond Laser-Based Modification of PDMS to Electrically Conductive Silicon Carbide

High-quality cutting polarizing film (POL) by 355 nm nanosecond laser ablation

High-quality cutting of polypropylene (PP) film by UV nanosecond laser based on thermal ablation

Fabrication of Perforated PDMS Microchannel by Successive Laser Pyrolysis

Process and mechanism of cutting thermoplastic polyurethane (TPU) film by nanosecond ultraviolet laser

A Glass–Ultra-Thin PDMS Film–Glass Microfluidic Device for Digital PCR Application Based on Flexible Mold Peel-Off Process

Effects of Ambient Temperature on Nanosecond Laser Micro-Drilling of Polydimethylsiloxane (PDMS)

Solvent-tunable PDMS microlens fabricated by femtosecond laser direct writing

Dimethicone-aided laser cutting of solar rolled glass