Abstract:Polydimethylsiloxane (PDMS) is a significant polymer that has attracted great attention for its wide applications and unique physical/chemical properties. Furthermore, flexible PDMS-based optical devices are broadly used in many fundamental applications. However, the current methods of tuning the optical properties of polymers and fabricating polymer-based optical devices still have some issues. Therefore, it is essential to develop a simple and effective method for tuning the optical properties of polymers and fabricating polymer-based optical devices, especially for the highly transparent PDMS. Here, a feasible method of tuning the optical properties of PDMS films and fabricating elastic volume Bragg diffraction gratings (VBDGs) by picosecond ultraviolet (ps-UV) laser-induced photochemical reactions was proposed. Firstly, polymeric materials' swelling and penetration behavior was utilized to introduce copper ions Cu(II) and photoinitiator benzophenone (BP) into the commercially available PDMS films. Subsequently, under the ps-UV laser irradiation (355 nm), the laser-induced photochemical reactions occurred between Cu(II), BP, and PDMS polymer chains, resulting in the formation of copper oxides (CuO/Cu 2 O) within the PDMS matrix. As a result, the optical properties (absorption, transmissivity, and refractivity) of the PDMS films changed without any structural damage or surface corrugation. In a wide range of wavelengths (200–800 nm), the absorption and refractive index of the PDMS films were enhanced while the transmittance decreased. The PDMS films with the desired optical properties (refractive index n = 2.25–2.68) could be obtained by controlling solution concentrations and laser treating parameters. With this method, the elastic VBDG (grating period: 20 μm) was fabricated, which showed good flexibility and the ability to be tuned by external stress (the strain of 0%-60%).

Solvent-tunable PDMS microlens fabricated by femtosecond laser direct writing

In Situ Fabrication of a Tunable Microlens.

Flexible fluidic lens with polymer membrane and multi-flow structure

Fabrication and Characterization of PDMS Microlenses Based on Elastomeric Molding Technology.

Discretely Tunable Optofluidic Compound Microlenses.

Simple Method for Fabricating Solid Microlenses with Different Focal Lengths

A Liquid-Filled Tunable Double-Focus Microlens

Fabrication of Polymer Microlens Array with Controllable Focal Length by Modifying Surface Wettability

Sol–gel concave micro-lens arrays fabricated by combining the replicated PDMS soft mold with UV-cured imprint process

Femtosecond Laser Weaving Superhydrophobic Patterned PDMS Surfaces with Tunable Adhesion

Microlens Fabrication by Replica Molding of Electro-Hydrodynamic Printing Liquid Mold

Optofluidic Microlenses: All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching (advanced Optical Materials 9/2018)

Liquid Microlens with Tunable Focal Length and Light Transmission

Rapid fabrication of large-area concave microlens arrays on PDMS by a femtosecond laser

Progress In Femtosecond Laser Fabrication Of Microlens Array With Spatial Light Modulators

All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching

Fabrication of Miniaturized Variable-focus Lens Using Liquid Filling Technique

Direct Optical Micropatterning of Poly(dimethylsiloxane) for Microfluidic Devices

Dielectric Liquid Microlens Array with Tunable Focal Length Based on Microdroplet Array Created via Dip-Coating Method

Versatile Route To Gapless Microlens Arrays Using Laser-Tunable Wet-Etched Curved Surfaces

Tuning the optical properties of polydimethylsiloxane films and fabricating elastic volume Bragg diffraction gratings by picosecond ultraviolet Laser-induced photochemical reactions